sharing entre 2 PC

[ilovefun]

Salut,

voil�, �a fait une semaine que je me prends la t�te � trouver une solution pour partager l'abo de ma carte off C$n@l + le bouquet.

Bon mon matos d'abord :

-1PC avec lecteur phoenix sur com1.
- Une TT S2-3200
- DvbDream comme soft.

Voil� mon avancement :

Premi�rement, j'ai test� l'ensemble de mon install avec Poorman's cam. Ca marche niquel.

Donc je vire ce plug et je mets � la place Card Server Client V4.002
Je param�tre ensuite mon serveur NewCS 1.17 RC10
Voici mon fichier newcs.xml :

<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
-->

<newCSconfig>

<readers name="Card Readers">
<device>
<name>Phoenix</name>
<type>Phoenix</type>
<node>COM1</node>
<mhz>357</mhz> <!-- or 357 -->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10001</newcamd_port>
<priority>round</priority> <!-- hard is default -->
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</deny>
</sid>
</device>


</readers>

<radegastserver>
<!-- valid value for enable are:
0,1 - Enable or Disable radegast server. -->
<enabled>no</enabled>

<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>678</port>

<!-- valid value for allow are:
ALL - Not active yet. -->
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>5.58.78.39</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>

<user>
<name>Petit</name>
<password>Tom</password>
<spider>on</spider>
<sidoverride>on</sidoverride>
<au>on</au>
</user>
<user>
<name>Grand</name>
<password>Tom</password>
<spider>on</spider>
<sidoverride>on</sidoverride>
<au>on</au>
</user>
<!-- Remove if you dont use reverse login -->


</newcamdserver>
</newCSconfig>

Je lance le serveur Newcs, la fen�tre dos m'indique les infos suivantes :

Reading Config file from newcs.xml
TCP-log password is disabled!
level: normal
type: init
output: all
logger config: level 1 type 3 output 255
log file:
logger: cant open file , file log disabled
udp log: host 5.58.78.39 port 1000
tcp port: 3001
[ 14:59:42 ] [ Box detect ] Windows XP Build 2600
[ 14:59:42 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix) not present, defaulting to NO
[ 14:59:42 ] [ Config ] COM1 ECM priority: round
[ 14:59:42 ] [ Config ] Option <autosid> for device 0 (Phoenix) not present, defaulting to NO
[ 14:59:42 ] [ Config ] No SIDFILTER is configured, disabling SidOverride for device 0 (Phoenix)!
[ 14:59:42 ] [ Config ] Option <hostname> or <port> not present for User: Petit, DISABLING reverse l
ogin
[ 14:59:42 ] [ Config ] Option <readers> not present for User: Petit, NO reader control enabled
[ 14:59:42 ] [ Config ] Option <hostname> or <port> not present for User: Grand, DISABLING reverse l
ogin
[ 14:59:42 ] [ Config ] Option <readers> not present for User: Grand, NO reader control enabled
[ 14:59:42 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 14:59:42 ] [ ECM Cache ] Initialising Cache with 10 entries
[ 14:59:42 ] [ Loader ] Reader type 2 on node COM1
[ 14:59:42 ] [ Phoenix ] Opening device COM1
[ 14:59:42 ] [ Phoenix ] Setting baud to 9600
[ 14:59:43 ] [ Loader ] Init Seca card
[ 14:59:43 ] [ Phoenix ] Setting baud to 9600
[ 14:59:43 ] [ Keyman ] Adding key 9FF7608 type 0 on Provider 0 for caid 0100 ID=0
[ 14:59:43 ] [ Keyman ] Adding key 0 type 1 on Provider 0 for caid 0100 ID=0
[ 14:59:43 ] [ Keyman ] Adding key AC4B4B6 type 1 on Provider 80 for caid 0100 ID=1
[ 14:59:43 ] [ Keyman ] Adding key A15B957 type 1 on Provider 81 for caid 0100 ID=2
[ 14:59:43 ] [ Keyman ] Adding key 0 type 1 on Provider 82 for caid 0100 ID=3
[ 14:59:43 ] [ Loader ] Card 0100 on port COM1 ready
[ 14:59:43 ] [ Loader ] Starting Newcamd Server on port 10001
[ 14:59:45 ] [ Newcamd:10001 ] User Petit logged in, client: Generic

Mon fichier csc.ini de mon serveur � l'entr�e suivante :

ActiveDLL = 1
newcamd525://Petit:[email protected]:10001:010203040506070809101112 1314

Je lance dvbdream, active le plugin, et l� rien.
Voici en revanche les infos dans la partie monitor du plugin :

15:13:25.531 - servers[0] started: newcamd525:127.0.0.1:10001
15:13:26.500 - newcamd525:127.0.0.1:10001: connecting...
15:13:26.515 - newcamd525:127.0.0.1:10001: connection done.
15:13:26.562 - newcamd525:127.0.0.1:10001: random bytes received...
15:13:26.578 - newcamd525:127.0.0.1:10001: send DATA_REQ...
15:13:26.609 - newcamd525:127.0.0.1:10001: Authorization done.
15:13:26.625 - newcamd525:127.0.0.1:10001: Cards present:
15:13:28.312 - CAT received:
15:13:28.312 - 0000: 01 B0 15 FF FF C5 00 00 09 04 09 19 E1 2D 09 04 .............-..
15:13:28.312 - 0010: 09 3B E1 2D C3 00 C5 .;.-...
15:13:28.312 - Can't find: CAID 0500, IDENT 008110
15:13:29.406 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )
15:13:35.765 - CAT received:
15:13:35.765 - 0000: 01 B0 3C FF FF CB 00 00 09 15 01 00 E0 C1 04 E0 ..<.............
15:13:35.765 - 0010: C4 00 81 E0 C5 00 80 E0 C7 00 88 E0 C8 00 86 09 ................
15:13:35.765 - 0020: 0C 05 00 E3 02 13 01 20 14 03 00 81 10 09 0C 05 ....... ........
15:13:35.765 - 0030: 00 E3 00 13 01 20 14 03 02 36 00 35 85 ED ..... ...6.5..
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c4, IDENT 000081
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c5, IDENT 000080
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c7, IDENT 000088
15:13:35.765 - SECA EMM: CAID 0100, EMMPID 00c8, IDENT 000086
15:13:35.765 - Viaccess EMM: CAID 0500, EMMPID 0302, IDENT 008110
15:13:35.765 - Viaccess EMM: CAID 0500, EMMPID 0300, IDENT 023600
15:13:35.781 - EMM Started on: CAID 0500, EMMPID 0302, IDENT 008110
15:13:38.421 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )
15:13:49.187 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )
15:13:58.859 - newcamd525:127.0.0.1:10001: send_ecm( CAID 0500, IDENT 008110 )

En gras la seule ligne qui me parait bizarre et apr�s les derni�res lignes boucle � l'infinie ...

Voil�, si quelqu'un � une id�e, je suis super preneur ...

MErci d'avance ...

[robert duval]

salut

c'est un probl�me d'ecm

faut que tu s�lectionne le bon provider.

celui l� c'est canal+ pour le c�ble.

A+

robert