Greywolf-codenamed "Midnight" for IR2

[Hexaphile]

This is the latest greywolf s/w.

It connects any linux box (newcamd,magicamd,cccam etc etc)

and Humaxes as well.


Humax and BF430 or humax and serial is okay as well.

It does NOT connect to Humax serial port.
It works with most IR embedded set top.

It runs under windows and works very well.

Humax is optional, that should keep the Dreambox fans happy...

ECM and EMM sent by any connection desired.


.


enjoy.

[me_ashman]

Mate you're a CHAMP!

[verad8]

Thankyou very much Hexaphile

[Hexaphile]

Originally Posted by verad8

Thankyou very much Hexaphile

you are most welcome sir.

thanks for saying thanks.

[Tagg]

so your saying this will do cccam "It connects any linux box (newcamd,magicamd,cccam etc etc)"

I had a look at the setting there was no reference magicamd,cccam just newcamd ???

Tagg

[mikeD]

Hello,
i am using Greywolfcs for first time. Maybe a Manual, or instructions how to configure server on win32 with client on newcamd (dreambox). I have irdeto2 v5 card, but i can not run the server corectly.

Thank you for the Help.

[Hexaphile]

Originally Posted by Tagg

so your saying this will do cccam "It connects any linux box (newcamd,magicamd,cccam etc etc)"

I had a look at the setting there was no reference magicamd,cccam just newcamd ???

Tagg

It basically doesn't care which of the above emu you use.

[Hexaphile]

Originally Posted by mikeD

Hello,
i am using Greywolfcs for first time. Maybe a Manual, or instructions how to configure server on win32 with client on newcamd (dreambox). I have irdeto2 v5 card, but i can not run the server corectly.

Thank you for the Help.

A manual is not required, it is too simple for a manual.

You must get a phoenix card reader, put it on a com port under windows xp, you need to know which port.

These are all pretty basic things, if you need a manual for setting GWM up then you will never get the Dreambox setup by yourself anyway.

Some IR2 V5 cards will not cardshare no matter what program you use.

[mikeD]

Thank you for the reply, i have 4016 v5 card and is working with newcs, but i thing this app is much better. My 2 clients can connect to Greywolf and the card is running, but i thing the camkey and crypthkey are wrong and i dont know what i have to do with the fixed commands. I have no EMM's and no ACM's are sending. Anyway, thank you.

[Z80]

go to card details, you can set custom IR2 commands there...it depends on your card.
same as if you were using newcs...you need the camkey values.