|
Smargo Smartreader+, problem to lock on correct speed.
Hi,
I have a problem with my programmers, I have used the utility to lock the programemrs at 8MHz, fixed speed, also newcs is configured to use 8MHz and from the output, it seems like newcs initiate the readers at 8MHz.
However, the cards have exacly the same responsetime as using 3,57MHz, (also tried att 6MHz with the same result) and from the output I see the value WWT:9600etu wich tellsme tha card is still operation in 3,57MHz, can anyone help me how to force the programmer to another speed (6 or 8 MHZ)
Reading Config file from newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 08:48:26 ] [ Box detect ] Windows 2003 Server Build 3790
[ 08:48:26 ] [ Config ] Pincode for device 0 (Smartreader+ on com3): 0000
[ 08:48:26 ] [ Config ] com3 ECM priority: round
[ 08:48:26 ] [ EMM Cache ] Initialising Cache with 0 entries
[ 08:48:26 ] [ ECM Cache ] Initialising Cache with 0 entries
[ 08:48:26 ] [ Loader ] Starting Telnet on port 1001
[ 08:48:26 ] [ Loader ] Reader type 2 on node com3
[ 08:48:26 ] [ Phoenix ] Opening device com3
[ 08:48:27 ] [ Phoenix ] Setting parity to EVEN on node com3
[ 08:48:27 ] [ Phoenix ] Setting 2 Stop bits on node com3
[ 08:48:27 ] [ Phoenix ] Setting baud to 23040
[ 08:48:28 ] [ Loader ] Clearing all autosids on reader ...
[ 08:48:28 ] [ ATR ] T=0 1etu=46.50us Guardtime:12etu WWT:9600etu
[ 08:48:28 ] [ ATR ] Historical bytes: 0 B 0 0
[ 08:48:28 ] [ Loader ] Init Conax card
[ 08:48:28 ] [ Phoenix ] Setting parity to EVEN on node com3
[ 08:48:28 ] [ Phoenix ] Setting 2 Stop bits on node com3
[ 08:48:28 ] [ Phoenix ] Setting baud to 23040
[ 08:48:28 ] [ Keyman ] Adding key xxxxx type 0 on Provider 000000 for caid 0000 ID=xxxx
[ 08:48:28 ] [ Keyman ] Adding key xxxx type 0 on Provider 000001 for caid 0000 ID=xxxx
[ 08:48:28 ] [ Loader ] Card 0B00 on port com3 ready
[ 08:48:28 ] [ Loader ] Starting Newcamd Server on port 15000
Thank you
|
Linear Mode
