[PLi® Enigma1] PLi® Jade Final Images Suite 20081001 Rev.5635

[hemertje]

A new Enigma1 PLi® Dreambox release is available for download.

The Original Enigma1 PLi® Jade Final suite contains the following images:

* PLi®-Jade-DM500
* PLi®-Jade-DM500-MaxVar
* PLi®-Jade-DM500-Old-Framebuffer
* PLi®-Jade-DM500-MaxVar-Old-Framebuffer
[Old-Framebuffer: only needed if you have a greenish OSD when using the normal DM500 software, if in doubt use the standard DM500 software]
* PLi®-Jade-DM500Plus
* PLi®-Jade-DM56x0
* PLi®-Jade-DM600
* PLi®-Jade-DM7000
* PLi®-Jade-DM7020


See below for what's new & fixed since the initial PLi® Jade RC release



Highlights:
- Satellite.xml split in Ka, Ku, C, S, L band
- Remote control behaviour reverted to pre-Jade
* (Some remotes suffered from very bad reception in the Jade RC)
- North America scan fix by Updatelee
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout!
* ('Var' partition is erased when the layout changes)
- Rotor improvement for the OpenEmbedded (OE) boxes


Enigma1:
- CVS Repository June 29th 2008
- PLi® Repository September 29th 2008
- CDK Flashtool: support flashing between standard partition layout and 'MaxVar' partition layout
* ('Var' partition is erased when the layout changes)
- Enigma Movieplayer fixed by ims
- Default sleeptimer now 30 minutes
- Insert and delete character support for DM500 remotes (Red and Green)
* Now Red (delete) en Green (insert) can be used.
* For all other boxes Vol+/Vol- and Red/Green can be used - it does not care...
- Remote control behaviour restored to pre-Jade
- Fixed 'DM7000 style' remote control for DM500
* (Added the ability to use the DM600, 7000, 7020 large remote on your DM500, DM56x0)
- Show serviceselector again with TV/RADIO key, but only if the mode already was TV resp. RADIO.
* Toggling TV/RADIO doesn't bring up the service selector
- Timeshift delay input value limited to 999 instead of 60 seconds
- Timeshift / recording support for DM500+ (settings equal to DM600)
- Rotor improvement for the OpenEmbedded (OE) boxes
* (Smooth start and faster rotating at 18 V, motor stop detection improved)


Plugins:
- Bitrate plugin fixes for NTSC


PPanel:
- Channelsetting reload in PPanel fixed


EPG Features:
- Use audio key for searchEPG in EPG channel


OSD Features:
- OSD transparancy setting in smaller steps for DM500+ and DM600 (5 instead of 25)


Web Interface Fixes:
- Some info in WebIf missing for IE fixed by ims


Network:
- Enable network and DHCP as default in case the Enigma config is not copied from /Var_init
* May fix some move /Var to network issues
- Do NOT add manually created mounts to the Enigma mount.conf
* It can cause double mounts if such a mount was already done in /Var/etc/init


Highlights DM500 MaxVar:
We've created 1Mb extra /Var space for you...
The removed items are now available via the PLi® downloads at the Software Management

We rebuilt the internal Flash tool completely!
So now you can flash back and forward between the standard PLi DM500 images and the PLi DM500-MaxVar images without using the serial cable!!!

We advise you to use the 'root.cramfs' method for this!
See the url below on how to Flash your DM500 via the 'root.cramfs' method:

See our DM500 Installation Wiki...

Moved to Software Management downloads:
- MV EPG plugin, Mediapli_8 skin, CCcam SoftCam, Cables/Terrestrial.xml, Translations, Games, traceroute, nslookup, IPtables, Netfilter drivers


Further:
- Thanks to Updatelee for North America scan fix

Thanks to the PLi testers for several fixes and features


Support:
- Online update support (IPKG feed) for OpenEmbedded boxes
* (DM500Plus/DM600/DM7020)
- Global satellites.xml updated September 29th 2008
* (DVB-S: FEC = Automatic; DVB-S2: FEC = Normal; DVB-S2 can't handle auto-FEC)
- Satellites.xml split in Ka, Ku, C, S, L band

See our PLi® Wiki...


Further, our Pli member Jonc created a Wikipedia Tool and PDA WYSIWYG Desktop Application for the PLi Dreambox images

If this DM500 version proves all OK, he will put the other Wikipedia Tools and PDA WebIf version online for the DM56x0, DM500+, DM600, DM7000, DM7020 and the limited E2 wiki.



So please report your feedback back at the forum...


Many low level changes fixes and other updates...

Detailed info, Wiki, FAQ's, HowTo's, TechNotes and information about this and the previous PLi® releases can be found on the PLi® Website:

PLi® Images website

[hemertje]

Our sincere apologies!

Due to a problem in our buildserver the 'normal' DM500 Jade Final release was created without the Softcam manager. Therefore you couldn't get the Softcams running.

This is fixed in the new 'normal' DM500 build with the date 20081003 which is online now in our downloadsection.
You can download it here: http://www.pli-images.org/downloads....download_id=56

We like to apologize for the inconvenience this may have caused, we're very sorry.

The PLi® Team

[gosse]

HI.

I have the same problem on my DB 800 HD. Download CCcam, but I dont find it in CI.
Can I start it whith telnet? because I find CCCam in /var/bin.

[hemertje]

menu - setup - softcam

[dimitris2003]

Sorry but this final version doesnt work perfect to me.
I cant find the "plugins" folder. Where is it ? i cant install maually any plugin.

I installed the total football with tar.gz file on my 7020 but i cant find the plugin folder in dreambox.

Any idea?
Thanks

[hemertje]

The Jade online Feeds for the OpenEmbedded Enigma 1 boxes (DM500Plus, DM600PVR, DM7020) are updated.


Features:

- Font rendering reverted to pre-jade-final
- RSS reader issues fixed
- 'West' picons fixed
- Image version info set to build version

You can install them via a Telnet session:

ipkg update
ipkg upgrade

Have fun, the PLi team

[grba]

Can someone tell me where to find "Netstat" function on PLI Jade