scsi to nokia

jenpeter · #1 (**permalink**) 02-24-2004

i have a nokia dvb 9500s and a scsi card tekram ultra scsi
dc-315u has any one been able to get this working can any one help me if so please let me know ?

Seafarer · #2 (**permalink**) 02-24-2004

Hi Jenpeter

I havent tried the Tekram myslef but others seem to have had them working.....see:

http://www.no-access.de/en/en_hardware.html

Which Windows are you running? Windows 95/98/98SE is easier to get going...hope you are not trying XP

There is a short doc I have attached, does your device manager pick up the Nokia?

Cheers

Sea

jenpeter · #3 (**permalink**) 02-26-2004

thank for the zip file helped a lot have got somewhere running win 98s on pentium 600 scsi card teram dc-315-u 50 male to male SCSI cable to nokia dvb9500s have scsi cdrom hard driver show up on nokia seting but still can not get driver up in Device Manager DVB 2000 Nokia Rulez

Radio Jim · #4 (**permalink**) 03-02-2004

Hi Jenpeter,
Have you managed to get your Nokia 9500 working with your Tekram DC-315U scsi card yet?
I had the same setup about a year ago, and managed (with some difficulty) to get them operating correctly with win98se and 333Mhz processor.
The Tekram SCSI card is a little slower than the Adaptec SCSI card.
To get the card operating you need to install the dos drivers, set the cards flash ram with the setup utility (in dos mode), then "rem" out the dos drivers from autoexec.
If you still need the settings or Tekram drivers, I,ll hunt them up and post them here.

Radio Jim

jenpeter · #5 (**permalink**) 03-02-2004

thanks i took the card back to shop i am look for a scsi card i looked on ebay lots of cards there but they all have 68 pin out i would like 50 pin out i have a cable do not want to buy another cable i got 7 mac 7600/200 at the dump would like to try them to hook up to my nokia do you know if this is possible

Radio Jim · #6 (**permalink**) 03-03-2004

Hi Jenpeter,
Tekram card is a good reliable card when set up though.
I have seen Adaptec AHA2940 card with a 50 pin socket.
Adaptec AHA2940U or UW has a 68 pin socket.
These cards work straighjt away with minimal setup.
I don't know about the SCSI leads that you have. I once purchased a 68 pin lead (new) from a computer shop and all it would do is hang the nokia 9500.
Apparently Nokia 9500 gets hot when using 50 pin but not when using 68 pin.
I have not confirmed this though.
If you need an Adaptec AHA2940 50 pin card, PM me as I have a mate in Perth who has some.

Radio Jim.

streeter75 · #7 (**permalink**) 03-16-2004

doesnt get any hotter with 50pin than what it does when its not logging....nokia 9500s,adaptec aha2940 50 pin, running on 98se, no problems..