gold card programming

wassamashraf · #1 (**permalink**) 04-03-2003

i have programmed my gold card and when i put it in to the f***el decoder it doesn't work it says E30 currently scrambed.

what should i do to view the channels.

any help will be aprreciated.

Agarn · #2 (**permalink**) 04-03-2003

Hi Mate,If you have read these forums you will know that we are good but not that good at reading minds.When you post a question please let us know more details of what gear your have,eg,programer,system,file used to program you card & maybe the method used to the stage when things don't work.Also anything else you can think of to help us out.Don't forget not to post any personal details from you own sub card.
Agarn

Scooterpig · #3 (**permalink**) 04-03-2003

E30 usually means 1 of 2 things wrong -

1 - Incorrect coco. (depending on your stu of course)

2 - Incorrect PMK.

CRO · #4 (**permalink**) 04-03-2003

leave it in there for a good 30 mins so its allowed to update itself

wassamashraf · #5 (**permalink**) 04-04-2003

I am using elvis on win xp with fm card. i have edited the gfpersonal with my subcscribers details but have lost the plot from there. i have got all the stuff needed i.e hmk,pmk etc.
the thing that confuses me is that do i first load the coco update non hex and the eeprom files first in the blank gold card and then the gfgoldpersonal stuff afterwards or is the other way around. Or am i doing it wrong. any help will be appreciated.

CRO · #6 (**permalink**) 04-04-2003

read read read,

Yes, load the epproma and hex first. Then open ur personal.crd and the ggold.crd to the card

Topcat · #7 (**permalink**) 04-06-2003

Try checking your details (or in fact loading them) using GGedit or LMedit, presuming its ghost code you are loading.

Load the pic and eeprom files. Once done, try the above utilities, and confirm your sub details are correct.

TC

wassamashraf · #8 (**permalink**) 04-07-2003

i have got a stu 720if from my provider fo*tel. do i also have to edit the gfgold with my own details as well or just the gfgoldpersonal. please help me. this is the thing i really dont understand . i tried to load the gfpersonal first and then gfgold stuff after but it erases everything in the blank gold card. so do i also have to edit the gfgold with my own details as well or just the gfgoldpersonal.

Topcat · #9 (**permalink**) 04-07-2003

1) Load your Pic and EEPROM Gold hex files onto your card.

2) Upload your personal details, as edited, in your personal CRD file, via FMCard, or cardhunter etc .. (OR) Use GGedit or LMedit to add your details directly.

wassamashraf · #10 (**permalink**) 04-07-2003

when you say load your pic is it the dual non coco update.hex stuff sir and then the eeprom file.