Quote:
|
Originally Posted by gangel
Anyone can help me out guys by providing me with a tutorial about how to connect my DB with my pc that uses Windows 2000 Professional?
I am not talking about the cable and the settings on the DB.
I just wanna know what to click and where in the windows 2000 in order to create the connection with my DB
Much appreciated any advice
|
Here you go.
things you need:
1. a serial cable - to connect the DB serial port to the serial port in yur PC
2. a cross over RJ45 - to connect the DB to your ethernet card in PC
1. Go to Start->Settings-> Network and Dial up Settings and open the local area connections
2. Open the TCP/IP properties and yu need to put in the IP address
3. For eg. Ip add: 10.0.0.10, subnet 255.0.0.0 and gateway 10.0.0.244
and enable the LAN connection
thsi in DB
1. Go to setup, connection and communication
2. Give the DBox ip address 10.0.0.97, subnet 255.0.0.0 and gateway 10.0.0.10
3. click on LAn or connect network.
now yu can ping the DBox from yur PC.
Power down yur Dbox.
Now you need the Dreamup software and put in the Dreambox ip and PC ip and click connect
Now yu'll see the connection being established.
Cheers
Linear Mode
