Official DK Canal Digital card problems

druiddk · #1 (**permalink**) 12-22-2005

I have almost all channels working on Canal Digital working perfectly... however when i try to open the Canal+ channels I get "Channel not found" or so error on the DB.

These channels are part of my subscription so thats not the problem.
Im running mgcamd.

Would really appreciate any tips!

druiddk · #2 (**permalink**) 12-28-2005

Please someone??!?!

Buzz · #3 (**permalink**) 12-28-2005

Try doing going into satellite setup and be sure you have 1 west, I had a similar problem when it was showing 0.9 west (or something like that), it happened after I installed a new image. After you have checked that then do a re-scan of 1 west, this should fix the problem.

//Buzz

druiddk · #4 (**permalink**) 12-30-2005

Hmm your right it is set to Int.707/Thor2,3(0.9W) but i dont see any 1.0W on the list?

However I do see a 0.8W...

Im running on a DM7020 with Hydra 1.09...

Buzz · #5 (**permalink**) 01-02-2006

Did you try a rescan of the Int.707/Thor2,3 ? How about installing a new image, I've just switched to PLi Diamond - very good image, had Hydra before. This might help with your problem.

//Buzz

Quote:

Originally Posted by druiddk

Hmm your right it is set to Int.707/Thor2,3(0.9W) but i dont see any 1.0W on the list?

However I do see a 0.8W...

Im running on a DM7020 with Hydra 1.09...

druiddk · #6 (**permalink**) 01-02-2006

From the Hydra Control Panel i downloaded a new channel list (pet123) and then i could see a 0,8W. After doing a channel rescan on 0,8W I can now use the Canal+ channels

Thank you for your help Buzz