RuCannon 6 and Manual Updates?

[mobad]

My latest Hydra was totaly messed with the Diseq so I am using RuCannon6 now.
It does not ahve the option of installing the latest new cams/keys via internet, so how do I manually do it?

Which cams/keys do I need?

[charos]

sure it has...through the setup menu as far as I remember...I am not using it now-I was just checking it- and I am 85% sure that from the setup you can download them. anyways , if you want to know the files for each softcam here is a list :

a. newcamd
Keys directory: /var/scce -keylist, ppua, rsakeylist & tpscrypt
Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
Config files: /var/tuxbox/config - newcamd.conf, cardserv.cfg, betad.cfg
AU files: /var/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin, sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin, nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin, nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist

b. UCAS/SCAM
Keys directory: /var/keys - SoftCam.Key, seca2,nagra,via, irdeto,conax
Program files: /var/bin - scam
Config files: /var/keys - softcam.cfg
AU files: /var/keys/ - seca2 /nagra_rom

c. CamX
Keys directory: /var/keys - SoftCam.Key
Program files: /var/bin - camx server
Config files: /var/bin - config serverconfig
AU files: var/keys/ - AutoRoll.key

d. Evocamd
Keys directory: /var/keys - Autoupdate.Key & Keylist.txt
Program files: /var/bin - evocamd
Config files: /var/keys - camd_cfg
AU files: /var/keys - Autoupdate.Key, /var/scce/ - nagraepr3.bin, nagraepr7.bin, nagraepr10.bin, nagraepr11.bin, nagraram3.bin, nagraram7.bin, nagraram10.bin, nagraram11.bin, nagrarom3ext.bin

e. Radegast
Keys directory: /var/keys - SoftCam.Key & AutoRoll.Key
Program files: /var/bin - rdgd, camd.rdgd, netpilot
Config files: /var/etc - radegast.cfg
AU files: Need a patched driver for older conax cards

f. Camd3
Keys directory: /var/keys - camd3.keys
Program files: /var/bin - camd3
Config files: /var/keys - camd3.conf, camd3.config
AU files: /var/keys/ - seca_hash.bin, seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys

g. MGcamd
Keys directory: /var/keys - SoftCam.Key & AutoRoll.Key
Program files: /var/bin - mgcamd
Config files: /var/keys - mg_cfg
AU files:

h. gbox
Keys directory: /var/keys - seca,nagra,via, irdeto,conax
Program files: /var/bin - gbox
Config files: /var/keys - gbox_cfg
AU files: /var/keys/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom

i. Xcamd
Keys directory: /var/keys - Keys.txt, AutoRoll.key
Program files: /var/bin - xcamd
Config files: /var/etc - xcamd.conf
AU files: /var/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom

NOTE: gbox and Xcamd are not supported by the rudreams image.

[mobad]

Thanx for the informative reply, much more easier for me to understand now.
Fromw hat isaw in the menu, I can only update the keys but not any new cams.

The only 2 keys I could download was SFteam and the 4th one int he list (out of 5). By downloading them 2 kleys and using the original cams that came with the image be fien for the latest opening of channels?

[charos]

well it depends on what softcam you use, what file-keys you download and what channel you want to see. As I remember there was this option for converting keys, right? try converting them to one softcam and then check the key file to see what channels you are suppose to have the keys for.