emu for Dnetwork - nothing works

[98dtaco]

Hi all,
I have a DM7000 and I've been playing with it for several days now. I have tried several images: Hydra, enigma, RU, etc and can't figure out how to set up any of the EMU's. My sat setup, net setup and channel lists are all fine.

I don't need keys, I can extract them from a subbed system - also, I can use the card if I knew how to setup boxkeys and the cardreader (Although I'd prefer to run cardless). I do need to know how to place the keys into the correct files and get the emu running. When using redgast on enigma with the proper keys in softcam.key my provider ID is always 000000 - is this correct.

I also can't seem to "tar" any pluggins via telnet - I get invalid tar magic or similar errors.

[charos]

I posted this for the third time today:

a. newcamd
Keys directory: /var/scce -keylist, ppua, rsakeylist & tpscrypt
Program files: /var/bin - newcamd, cardserv, cardspider, betadserv
Config files: /var/tuxbox/config - newcamd.conf, cardserv.cfg, betad.cfg
AU files: /var/scce/ - nagrarom3.bin, nagraram3.bin, nagraepr3.bin, sttestrom3.bin, stmaprom3.bin, nagrarom7.bin, nagraram7.bin, nagraepr7.bin, nagrarom10.bin, nagraram10.bin, nagraepr10.bin, nagrarom11.bin, nagraram11.bin, nagraepr11.bin, rsakeylist

b. UCAS/SCAM
Keys directory: /var/keys - SoftCam.Key, seca2,nagra,via, irdeto,conax
Program files: /var/bin - scam
Config files: /var/keys - softcam.cfg
AU files: /var/keys/ - seca2 /nagra_rom

c. CamX
Keys directory: /var/keys - SoftCam.Key
Program files: /var/bin - camx server
Config files: /var/bin - config serverconfig
AU files: var/keys/ - AutoRoll.key

d. Evocamd
Keys directory: /var/keys - Autoupdate.Key & Keylist.txt
Program files: /var/bin - evocamd
Config files: /var/keys - camd_cfg
AU files: /var/keys - Autoupdate.Key, /var/scce/ - nagraepr3.bin, nagraepr7.bin, nagraepr10.bin, nagraepr11.bin, nagraram3.bin, nagraram7.bin, nagraram10.bin, nagraram11.bin, nagrarom3ext.bin

e. Radegast
Keys directory: /var/keys - SoftCam.Key & AutoRoll.Key
Program files: /var/bin - rdgd, camd.rdgd, netpilot
Config files: /var/etc - radegast.cfg
AU files: Need a patched driver for older conax cards

f. Camd3
Keys directory: /var/keys - camd3.keys
Program files: /var/bin - camd3
Config files: /var/keys - camd3.conf, camd3.config
AU files: /var/keys/ - seca_hash.bin, seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys

g. MGcamd
Keys directory: /var/keys - SoftCam.Key & AutoRoll.Key
Program files: /var/bin - mgcamd
Config files: /var/keys - mg_cfg
AU files:

h. gbox
Keys directory: /var/keys - seca,nagra,via, irdeto,conax
Program files: /var/bin - gbox
Config files: /var/keys - gbox_cfg
AU files: /var/keys/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom

i. Xcamd
Keys directory: /var/keys - Keys.txt, AutoRoll.key
Program files: /var/bin - xcamd
Config files: /var/etc - xcamd.conf
AU files: /var/roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom

NOTE: gbox and Xcamd are not supported by the rudreams image.

[charos]

addition: so basically check in an upload center to get a typical view of the key arrangement. Although for a start try an image with autoupdated features - like hydra- and then edit the files. It's also good to upload the files and edit them with UtraEdit and then download them again to your dreambox...

[98dtaco]

Thanks for your help, I've got emu (redegast) running on several -110 d***net channels (provider id#000001), but cannot figure out how to get it to read the keys for provider #000000 (all -119 channels and some -110 channels). I've had to edit directly the nagra.tmp file to get the -110 - perhaps some help on the different fields and what they signify?

Thanks

[charos]

did i try with any other cam? try newcamd, mgcamd and evocamd and if nothing happens ,tell me and I will try to help u -although I am not really a guru when it comes to editing nagra.

[revolt48]

Hi all
i need your help to config gbox to get key's from keylist.txt

thank'x in advance