Need Some help.. DM 5620

[freemchr]

Picked up a Dreambox 5620 on the weekend.. now trying to configure it.. got the null modem cable, and scart lead and all what is needed to get it it up and running. Front of Unit says 5600 however sticker on the back of the unit and the box says 5620-s. So I presume its the 5620.

Have some problems in getting it all working..

Followed the instructions as listed on the dreambox 101 tutorial.

The steps i have done is as follows..

1. Connected Network Cable, Null Modem cable etc and have unit powered off and unplugged at the switch.
2. Run DreamUp 5620 v2.14b 20030416. Dreambox is connected to Com2 on the PC. Click Connect.
3. Connection prepared, switch on Dreambox. Dreamup says connection established. Clicked Flash then selected hydra56xx_sateez_2304.img

Dreamup says Uploading and is transferrng at about 10kb/s front of the dreambox LCD says 5600 boot and is scrolling.

Dreamup now says Verifying checksum. resetting lockbits, erasing flash then flashing image.

Now says Flash Update Finished, result 0

Ok switched off the dreambox for 30 seconds.. unplugged serial cable from unit..

Turned on Dreambox hold down upper left key on front until 999 appears, then let go.. unit appears to do something and then comes to setup tv system.. selected pal, then the state/time zone..

selected no Disecq then went to the setup menu via the dream button.. clicked Expert, then Communications Setup entered details of LAN and IP.

Selected enable Network then Save, then ok..

Connected via FTP to the unit
Uploaded Satellites.xml (Global version) to /var/etc/ directory

Now not sure which networks i should be scanning.. cant get a lock or sync on any of the main ones.. Optus B1 etc..