New Firmware 'rel 2.0.9' for TGS 100

[rickie3]

*How to update TGS 100

*Image for autoupdate by ITGATE Control Center ver2.1.1

1) Download and Unzip the file below.
http://itgate.co.kr/Rel/209/TGS100autowin_rel209.zip
2) Run the ITGATE Control Center ver2.1.1
3) Click "Update" icon.
4) Insert your IP address.
5) Click "TGS 100 Auto update" icon.
6) Select the folder containing update files.
7) Autoupdate will be started.
8) Wait until TGS 100 reboot automatically.

*How to update TGS100 with Memory Card automatically
1) Copy all files inside folder(after unzip) to the memory card.
http://itgate.co.kr/Rel/209/TGS100automc_rel209.zip
2) Switch off TGS 100 and insert the memory card into the memory card slot of front panel.
3) Switch on TGS 100 and you can see "doun" on LED display, it means downloading is started.
4) Soon after, you can see downloading process by number(1~100) on LED display. Please wait until it shows "done".
5) After checking "done" on LED display, remove Memory Card and switch off and on again.
6) Update completed!
Warning) Do not remove memory card during reading and writing mermory card in any cases.

*How to update TGS 100 by Flashing through serial port
1) For Serial update, please click hereunder to download the image
http://itgate.co.kr/Rel/209/TGS100srl_rel209.zip
2) Power off TGS 100.
3) Power on while pressing OK button on front panel. If you can see UPGD on LED, release OK button.
4) Run "ITGATE Control Center".
5) Click "Serial" icon.
6) Select the image file by clickiing FILE.
7) Press OK button on front panel to start flashing.
8) When the flashing is done, LED shows Done and tool shows message, "complete".
9) Power off and on again.

*How to update by Internet
1) Press MENU button on the remote controller and go into " Setup -> Expert Setup -> Software Update -> Internet Update" and select the image.
2) Follow as prompted on the menu..

Notice) Please be noted the Password of the ITGATE will be changed as "admin" from this version.

Improvements are :
- Improved Memory Card auto-detection (TGS 100)
- Updated Enigma(22-3-2007 version)
- Libcrypto 0.9.7 symbolic link bug fixed
- Dialogue box text error fixed

[zephyr]

Where are the fixes ?

* The crippled itgate driver which makes Bullz_text and Gsub to not work properly
* Lipsync problem on different sattelites (Thor/Sirius)
* 100% compability with dreambox plugins (without the need of recompilation of plugins)

I am SOO tired with this box now.