humax ir 5410z

[cannon]

i am having problems uploading from a irc 5410z , can you only download to these boxes? as i have already preset the box and want to use these settings in another box i have tried a null modem cable and a normal cable and just get waiting for connection i am using humbox 4.1 on win 98

[Recycled]

Humbox, by default, defaults to a 5400 model with a system ID of 01020000. This ID number needs to be changed to 01030000 the system ID of the 5410.

I don't know if you are aware or not but the sequence is as follows.
Attach a NULL MODEM cable.
Run HUMBOX and ensure Sytem ID and COMM Port is correct.
Press the RED on/off button on your remote, this essentially puts the Humax into standy by mode. Your display screen will present OFF.
In HUMBOX, select UPLOAD FROM HUMAX, IE get your existing settings off the Humax.
You will get the STB to PC screen (Blue Line)
Press the RED (On/Off) button again and a connection will be made (Transfering and Recieving STB flash data) (Graduating RED Line). This process can take a couple of mins, be patient.
Once the data is downloaded to your PC you can manipulate it in HUMBOX then reverse the process to send it back to the STB.

Good Luck, yell if you get stuck