I have a 3200ir wiil pick up all channells but for some reason with all the op*** aur*** it comes up with e48 no signal. any ideas or suggestions would be greatly appreciated i have th lnb set at 9750/10700 which is the universal setting and have tried at 11300 also with no luck.
i'm wondering how you got those channels listed in the first place.
you can search this site for transponder frequencies or go to lyngsat for them.
then go into your installation menu and then channel search.
then do a manual search with the optus transponder freq, symbol rate and polarization. if everything is correct you should see the bar meters showing for your lnb and quality.
if so do a network search.
repeat the process for other providers.
if there's no signal quality level then the problem is elsewhere.
i've left it to you to search because you will learn more reading what has already been writ.
if you are still stuck tell us what you have done so as to narrow it down.
knowing if you ever had it working would be a start.
Thankyou for your help I had alot of chennels become scrambled yesterday so i had to delete everything and start agian and the auro** channels are no where to be found. So Im not going to try to find them agian. out of sight out of mind.
Thanks again
Ok Rickie3 I took your advice and gave it another go and guess what happened. I worked it out.
What was happening is I have an aus*** box and the toppy on the same dish with a splitter. so what i did was changed the one that supplies the power to the lnb with the one that does not supply the power and of coarse i turned on the lnb power on the toppy and changed the lnb to 10750 and all channels came up and even ones I didnt get b4 and all work with the exception of some that are scrambled. The reason i had the lnb power on the provider box was because it was frequently coming up with lost signal due to whether lnb settings etc etc...which was everytime i was on a channel that cant be picked up by it.
So thankyou for all for your help and encouragment.
Linear Mode
