Applying ALLSAS4 Patch to Nokia 9500S via Null Modem cable

fartminion · #1 (**permalink**) 08-22-2002

Guys, have tried to apply patcy and all appeared ok but box reverted to the boot loader display of something like b2 000 000 etc and would not respond to anything. Downloaded DVD2000 B8, uploaded this and all is well (exept I now have a dick for a volumn indicator or is that dicktator))... H ave retried loading the allsas4 patch but with same end result. Looking at my cam info is says allsas4. Am I missing something here ????

spence · #2 (**permalink**) 08-23-2002

I'm confused.....Have you loaded amon onto your CAM? It's not possible to load amon via the serial port. This is a physical CAM change. Amon is CAM software and needs to be loaded directly into the eprom on the CAM. It is not software like DVB2000 or NoOneManIt. There is info out there on how to mod your nokia CAM

fartminion · #3 (**permalink**) 08-23-2002

The cam has been modded and is now I beleive an ALLSAS4 version/firmware, instructions I have seen indicate that the nokia has to have a patch applied. I have spotted a file labeled allsas4 patch and it is a .bin file, after uploading it the box reverts to b2.0000uns or somithing like that and does nothing else. I am able to re-load DVB2000 to get it going but I guess I just need the correct patch or method

spence · #4 (**permalink**) 08-26-2002

u can use firmware by NoOneManIt or there is a DVB2000 Beta6 with an ECM patch included. I have used both for a DS9 card.