Nokia MM9800S VA1.1 Firmware

zeev · #1 (**permalink**) 09-06-2006

HI T24
I need your help to get the VA1.1 Firmware for my Nokia MM9800s.
I have tried to enter to www.satellite.co.uk Forum and to download this file
but I was rejected and i do not now why.So please help me to get it via this Forum.
My alos is what is the different between VA1.0 and VA1.1!!??
THanks in advance /
ZEEV

**T24** · #2 (**permalink**) 09-15-2006

I can download the file mate,have you installed winrar?

Aldeto · #3 (**permalink**) 09-15-2006

I got winrar,can u please download it,I hope it's better than the MA 2.0.

Aldeto · #4 (**permalink**) 09-28-2006

T24, can u please download the MM9800s VA1.1
I would like to load it into my 9800s,I read some good points on it.
I can't be bother joining the other forum as it does not serve much of the stuff they are on in Europe/UK here in Asia/Pacific.

**T24** · #5 (**permalink**) 09-28-2006

Here you are

zeev · #6 (**permalink**) 09-29-2006

Hello T24
Thanks for Nokia 9800S VA1.0 Firmware.
The reason that I asked you what is the difference between the VA10 S/W to the VA1.1 S/W is that in SATzentrale.de Forum Nokia section they recommended
not to use the VA10 firmware because you can not upgrade MM9800S to the previouse MA2.09 again.
THanks again
Zeev

Aldeto · #7 (**permalink**) 09-30-2006

Thank you T24,I have upgrade my mm9800s,it responds better and quicker.
The only upgrade I wish they can come up with is the Pal to NTSC conversion.
And I still can't rearrange the channels like on S/W MA 1.2.

Cheers,
Al.

zeev · #8 (**permalink**) 09-30-2006

Hi Aldeto
As I understand you have upgrade mm9800s with Va10 Firmware and my question is what kind of bootloader you had in the receiver ??
I have bootloader 1.04 and as I read it need version 2.00 if yes
where can I find bootloader 2.00 and how upgrade with it my receiver!?
Thanks in advance
Zeev

Aldeto · #9 (**permalink**) 10-01-2006

You do not need bootloader 2.00,you can load it with 1.04 like my mm9800s
all you need is a Null Modem Cable or cut your serial cable and reverse the connection and re-solder it.
I'm not sure about bootloder 2.00,I think this only applies to Nokia 9200-9600 where hardware modification is involved,you might have to contact Nokia if changing the bootloder.

zeev · #10 (**permalink**) 10-01-2006

Hi Aldeto
Thanks for your quick reply.
Nokia 9200-9600 their using bootloaders 1.06 or 1.07 that I know from my mm9600s.
Zeev