problems running dual 1/4 diseq switches

[dajsel]

Hi.
Real n00b when it comes to run more than 4lnb's in the same system , cant get it to work at all

The "hardware" that im using is as follows :
DB 7000-S receiver
T90 Wavefrontier dish
2 4/1 diseq switchs
1 14V/18V switch

The whole plan was to switch between the 4/1 switches with the 14/18V switch ,
but it did result in that i only could run the lnb's in V or H polarity
depeding on witch port i used in the 14/18V switch becouse
the lnb's uses 14/18V option to switch the polarity between H/V
And also running an 22khz switch wont do it either becouse
the lnb's uses 22khz to switch between Hi/Lo .

So the question is how do i get the 8 lnb's to run with my db 7000-s
without having manual switches and such

second post , might be a better place here in /hardware . ?
_________________
db 7k-s 0.8W+1W+5E+19.2E+28.2E+28.5E Hydra -zeus- 240G cifs 128mb /usb

[bossbig]

i use a diseq 1.1 (spaw). have a look on the menu installation at http://dreambox.sjerom.com/.

[dajsel]

thnx man , that was a nice "Howto" really helpfull