Newcs and Irdeto version 2 card problem!

[a164]

Hi to all!

When running newcs150 and mgcamd127 + Ideto orig card I cann't see anything!

The funny thing this card works with Hydra and Radegast 3!

The printout after starting newcs once case A

[ 13:40:47 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 13:40:47 ] [ Sci ] Opening device /dev/sci0
[ 13:40:49 ] [ ATR ] T=8 1etu=1860.00us Guardtime:17etu WWT:9600etu
[ 13:40:49 ] [ ATR ] Historical bytes: [84] a [DD] [0A] [0A] [0D] [93] [B2] [C9]
[AE] 6 [FE] [00] [00] [00]
[ 13:40:49 ] [ Loader ] Init Irdeto card
[ 13:40:59 ] [ Loader ] Card 0600 on port /dev/sci0 failed
[ 13:40:59 ] [ Loader ] Starting Newcamd Server on port 10000
[ 13:40:59 ] [ NewCS ] Ready to GO!

After starting a second time case B

[ 14:39:28 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 14:39:28 ] [ Sci ] Opening device /dev/sci0
[ 14:39:32 ] [ Loader ] Reset failed ...
[ 14:39:32 ] [ Loader ] Starting Newcamd Server on port 10000
[ 14:39:32 ] [ NewCS ] Ready to GO!

If I restart newcs I get back the printout of case A

In case A the card couldnot initiate, therefore mgcamd will not work
In case B the card failed to be reset.

tuxbox mgcamd v1.27b by mixvt (compiled Dec 31 2007 16:49:33)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:17
2.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dreambox
Conax.Key error 2: No such file or directory
[config] newcamd route = local:127.0.0.1:10000 server cardserver
newcamd keep alive: 0, incoming port: 12000
[mgcam] emm thread started
[mgcamd] tps update started.
[newcamd] Connecting to 127.0.0.1:10000...
[newcamd] Login to 127.0.0.1:10000 as xxxx accepted (0ms)
[newcamd] Card data from 127.0.0.1:10000 (1ms):
Userid 2 caid 0 providers 1
Idents: 000000
got 8 cmd 9F
got 54 cmd 9F
[mg0] namespace 820000 t-id 2F44 on-id 13E
[mg0] descramble on 3, source 1
[mg0] service 1D53 index 0 pmt pid 106 (2)
ECM: CaID: 0x0604 -> CaPID: 0x05FB ProvID: 000000
[mg0] No irdeto2 key(s) found for id 604 keynr 06
[mg0] network can't decode
[mg0] pid 0x05FB failed to decode.
[mg0] No irdeto2 key(s) found for id 604 keynr 06
[mg0] network can't decode
[mg0] pid 0x05FB failed to decode.
[mg0] No irdeto2 key(s) found for id 604 keynr 06
[mg0] network can't decode
[mg0] pid 0x05FB failed to decode.
[mg0] No irdeto2 key(s) found for id 604 keynr 06
[mg0] network can't decode
[mg0] pid 0x05FB failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0604 -> CaPID: 0x0500 ProvID: 000000
[mgcamd] emm stopped

The newcs.xml device section:

<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>none</parity>
<reset>Normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<rsa>0000000000</rsa>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>No</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>No</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

The same config works fine with Conax card

[ 14:50:08 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 14:50:08 ] [ Sci ] Opening device /dev/sci0
[ 14:50:11 ] [ Loader ] Clearing all autosids on reader ...
[ 14:50:11 ] [ ATR ] T=0 1etu=372.00us Guardtime:12etu WWT:9600etu
[ 14:50:11 ] [ ATR ] Historical bytes: 0 B 0 0
[ 14:50:11 ] [ ATR ] WARNING! You are overclocking your card: 5.714Mhz (Max 4.00
0Mhz)
[ 14:50:11 ] [ Loader ] Init Conax card
[ 14:50:11 ] [ Loader ] Card 0B00 on port /dev/sci0 ready

and of course mgcamd works as well!

Any clue???

[frisbee]

Hi,

I don't think you will be able to read your IRD v2 card on any embedded card slot using NewCS. You might get lucky with a very old version of NewCS.

It seems that as time goes by and NewCS progresses, the support for Irdeto V2 cards is left out. try using an external card reader and you will be OK.
If not, try a version lower that 1.30.

Cheers

[losk]

Well on the past I used NewCS 1.20 and MGcamd with my Irdeto 2 card and worked without any configuration.
But now I have a new one, Irdeto version Zeta card, and it has problem with NewCS. It opens some channels and some others not...

[me_ashman]

you're log says "[ 13:40:59 ] [ Loader ] Card 0600 on port /dev/sci0 failed" check your setup with newcs.

[marpam]

Try NewCS v1.05 or earlier.

[BLESK2HOT]

HELLO MY FRIEND
YOU SAID IN THIS TOPIC ABOUT EXTERNAL CARD READER.DO YOU KNOW A PROGRAM FOR SMARTMOUSE PROGRAMMER AND IRDETO ACCESS CARD?THANK YOU

Originally Posted by frisbee

Hi,

I don't think you will be able to read your IRD v2 card on any embedded card slot using NewCS. You might get lucky with a very old version of NewCS.

It seems that as time goes by and NewCS progresses, the support for Irdeto V2 cards is left out. try using an external card reader and you will be OK.
If not, try a version lower that 1.30.

Cheers