CCam and Irdeto V2 card

frisbee · #1 (**permalink**) 09-10-2007

Hello,

I am trying to get CCcam (2.00 onwards) to read off an irdetoII V2 card.
To no avail!
I have bee able to get it to read a V5 card...

Is there a setting or a different CCcam (or any softcam) version I can try?

Cheers,

frisbee · #2 (**permalink**) 09-11-2007

I managed to get pictures off the card with two ways:

1. SCAM 2.5 and SCAM 2.5/RONALD-CS. The only problem is I can find no info whatsoever on RONALD CS....

2. NEWCS via RS232. The onboard card reader would not recognize the card. With NEWCS (1.18) I read it and served it via newcamd and then used CCcam 2.0.2 to connect to it....

gado · #3 (**permalink**) 09-12-2007

Only got piccys back on CCcam 1.3 on the embedded reader otherwise use a phoenix on the external com and it work on CCcam 2.03 fine IR2 and ndeess not probs.

SkepTik · #4 (**permalink**) 09-25-2007

Why not just use that emu starting with a G!

frisbee · #5 (**permalink**) 10-01-2007

@SkepTik

The G emu does not work with V2 cards either.....
Especially if one of the mandatory and always running aspiring clients is using a stock CAM...

akis · #6 (**permalink**) 10-03-2007

Irdeto 2 and card ver. 2 works fine only with newcamd 6.10b. Install and take this newcamd.conf. Change only the network with yours.

EMU = yes
PREFER_EMU = yes
AU = yes
OSD_TIMEOUT = 0
OSD_WEB_LOGIN = root:dreambox
SHOW_ALL_CA_SYSTEMS = no
DEBUG_ECM = yes
DEBUG_EMM = no
DEBUG_CWS = yes
DEBUG_CAM = yes
SHOW_PAT = no
SHOW_PMT = no
SHOW_ECM = no
SHOW_CAT = no
SHOW_EMM = no
SHOW_CWS_ECM = no
SHOW_CWS_EMM = no
EMM_REPORT_WRONG_SIG = no
DEFAULT_CW_DELAY = 0
RELOAD_CONFIG_ON_ZAP = yes
RELOAD_KEYLIST_ON_ZAP = no
CA_INFO_FILE = /tmp/cainfo.txt
CWS = 127.0.0.1 10000 local local1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS = 127.0.0.1 10001 local local1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = no
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

gado · #7 (**permalink**) 10-03-2007

1.71 is the latest CCcam for the job. Any later wont work unless you feed them through newcs.

frisbee · #8 (**permalink**) 10-04-2007

@Akis,

Hello,

The client side is the simple thing to do...

The thing is that as Gado suggests you need a separate application
such as newcs to run as server....

Cheers

akis · #9 (**permalink**) 10-07-2007

@ frisbee,

Hello,

to run as server in blue panel just take newcamd 6.10b server and take only the newcamd.conf in my first post and change only the server ip.
Is very simple.

oceanboy · #10 (**permalink**) 10-07-2007

G emu works with internal card slot on ITGate