CCcam 1.3.0

[plutten125]

Originally Posted by sport

yes also from 2 hops it will send EMM to newcs

Shure??
I haven't seen a singel emm on my conaxcard. Hopfully the emm comes with standalone cccam, if it ever works...

[tommyo123]

Originally Posted by sport

yes also from 2 hops it will send EMM to newcs

Interesting. 1 hop away is enough for me if working. I'm using only the newcamd connection ( N: 127.0.0.1..... ). I'm using pretty much the default configuration, but have been trying fiddling with DISABLE EMM and EXTRA EMM LEVEL, but no success.

Do you have any hints for updating with NewCS instead of the builtin cardreader? Getting ECM isn't a problem for none of my cards on NewCS, both NDS and Conax.

[snakie]

In some configurations,depending on the card and the encrypted system used,CCcam and newcs dont work ok.And also CCcam has the tend to kick out the users and then reconnect them,nothing to do with the login.Conax cards supposed to be updated correctly in this version,this is what it says in their readme.Sometimes it helps to first start the capmtserver and then CCcam if you have problems with some cards in the internal slots.Maybe in the next version they put some options to totally disable the internal reading of CCcam for internal slots,because sometimes if you restart newcs CCcam doesnt let newcs to read the cards and newcs reports not ready server.thats for now ....if the authors read it let us know,maybe we can find more bugs to help them make CCcam better

[sport]

Originally Posted by tommyo123

Interesting. 1 hop away is enough for me if working. I'm using only the newcamd connection ( N: 127.0.0.1..... ). I'm using pretty much the default configuration, but have been trying fiddling with DISABLE EMM and EXTRA EMM LEVEL, but no success.

Do you have any hints for updating with NewCS instead of the builtin cardreader? Getting ECM isn't a problem for none of my cards on NewCS, both NDS and Conax.

ididnt test it but this is wat shows in readme file today i will test it & let u now if it send EMM or not to the newcs

[cwispy]

Originally Posted by snakie

In some configurations,depending on the card and the encrypted system used,CCcam and newcs dont work ok.And also CCcam has the tend to kick out the users and then reconnect them,nothing to do with the login.Conax cards supposed to be updated correctly in this version,this is what it says in their readme.Sometimes it helps to first start the capmtserver and then CCcam if you have problems with some cards in the internal slots.Maybe in the next version they put some options to totally disable the internal reading of CCcam for internal slots,because sometimes if you restart newcs CCcam doesnt let newcs to read the cards and newcs reports not ready server.thats for now ....if the authors read it let us know,maybe we can find more bugs to help them make CCcam better

Have you tried running CCcam with the -s switch to switch off the server? Also make sure the B: lines are commented out in your CCcam.cfg file so its not looking at the card readers.

[fkp]

can somebody give simple config for to make server for linux i tried all ok but cant make it go with dreambox, i need linux pc as server config and dreambox as client config any useful tip can make me go i detected card ok with linux pc /dev/ttySx and the its detected only i need my linux pc and the card to comunicate to the dreambox as client

[bable]

Originally Posted by sport

1.3.0
-fixed some 64 bits issues
-fixed radegast provider id and nano field
-reduced binary size
-immediately interrupt lengthy emu calculations when zap takes place
-userinfo was not correctly reread, therefore you needed to restart CCcam when certain parts of the userinfo changed, fixed
-it is now possible to block a channel for a client, based on caid:id:sid see F entry config for an example
-changed emu share limits behaviour, <1.3.0 an emu matched a F entry limit with {caid:ident:n}, for any nonzero ident. >=1.3.0, an emu only matches {caid:0:n}
-added '-l' cmdline option, to disable all 'self-learning' stuff. This option might avoid problems with irdeto smartcards
-ports 15000-15004 and port 14000 are now gone. Use 16000 and 16001 (html) instead
-implemented workerthread pool to handle client requests, to improve handling larger numbers of clients
-added support for cryptoworks camcrypted cards (incl arena tv). IPK handing is internal, no need for external keys and such
-added support for BEEF patched cards using nagra over seca tunnelling, add id's in config file(see example)
-added conax smartcard support (ecm+emm)
-added entitlements for cryptoworks and conax smartcards
-allow emm one extra level

I have 2 irdeto cards
irdeto 0604 have some bug when channel change you r wait 5 to 10 second then picture display.How fix this bug???????

[ricky]

Yep I have gone back to 1.21......my card freezes every day running with newcs....no probs with 1.21.

[newfunfan]

I do not really anderstand the meening of this change can some of you give me a glue about this
line in the change log

-changed emu share limits behaviour, <1.3.0 an emu matched a F entry limit with {caid:ident:n}, for any nonzero ident. >=1.3.0, an emu only matches {caid:0:n}


Thanks

[fkp]

ok solved linux as server with 8 local cards over /dev/ttySx 4 irtedo 2 via 1 conax i seca all ok updates ok and dream as client also work great over great gb**x share too good work best ever emulation come accross weldone no bugs and works very smooth without any error now over 7 hrs