CCcam v1.0.0

[maximusdream]

CCcam v1.0.0

# CCcam team uvadi CCcam v1.0.0
#
# Special greets go to Dale Cooper, the RuDream and ofcourse HDLteam
#
# For system without new enigma socket.... capmtserver is your friend ;-)
#
# cau cau
#
# some fixed listening tcp port for info:
#
# 14000 card info
# 15000 online clients
# 15001 online connections
# 15002 online shares

# syntax for to add newcamd server connection
# example:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
#N: ip port name pass des(14byte)


# syntax for to add radegast server connection
# example:
#
# R: 127.0.0.1 678 0100 000080
#
#R: ip port ca4 id6


# syntax for to add a friend user to CCcam with the hops and the deny list
# example:
#
# F: CCcam RuleZ 2 { 0100:000080, 0622:000000 }
#
# this user gets 2 hops (localcards + one away) and no 0100:000080 and
# also no 0622:000000 cards (expandable with more entries)
#
#F: username password hops { ca4:id,ca4:id,... }

# syntax for to add a client connection to other CCcam
# special! add yes on end to use friends emus (non public private key/emu,etc...)
# example:
#
# C: hostname.CCcamServer 12000 CCcam RuleZ
# connects to CCcam without use of friends emus
#
#C: hostname.CCcamServer port username password


# server shall listen on this port pro incoming connections
# default port is 12000
#
#SERVER LISTEN PORT : 12000


# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
#ZAP OSD TIME : 3


# Serial path to phoenix reader. Add as many as you have attached too your system
# default is none
#
#PHOENIX READER PATH : /dev/tts/0


# if timing should be shown in OSD and debug output
# default is 0 (turned off)
#
#SHOW TIMING : 1


# turns debugging on and off
# default is 0 (turned off)
#
#DEBUG : 1


# should CCcam try to read and parse newcamd.conf for server connections
# default is 0 (turned off)
#
#NEWCAMD CONF : 1


# configure what blocker you want. Add as many as readers you have attached
# default is blocking nothing
# blocker for smartcard device
# B: /dev/sci0 01
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# and sum of for combinations
#
#B: /dev/sci0 01


# what Softcam.Key should CCcam try to read
# defaults to /var/keys/SoftCam.Key
#
#SOFTKEY FILE : /var/keys/SoftCam.Key


# what Autoroll.Key should CCcam try to read
# defaults to /var/keys/Autoroll.Key
#
#AUTOROLL FILE : /var/keys/Autoroll.Key


# what constant.cw should CCcam try to read
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
#
#STATIC CW FILE : /var/keys/constant.cw


# in this file you can configure what CAIDs CCcam should ignore
# defaults to /var/keys/CCcam.ignore
# file content can be like
#
# I: ca4 id6 ignore allways this caid/ident
# S: ca4 id6 sid4 ignore caid/ident only on sid
#
#CAID IGNORE FILE : /var/keys/CCcam.ignore

[s_Fanous]

Looks like newcamd + radegast + gb*x all combined in 1 EMU!!!!

[bcc]

these questions are against rules

[Alien Cool]

thnx
Look more to cs connection...
May I know what encryptions that supported with this emu?
Just need more details since I don't have all encryption cards to test.
Keep a good work

[briosa]

This emu works with all images?

[jeepcook]

Hello, It's new ... but don't work on dm7025.....

[dAF2000]

Originally Posted by jeepcook

Hello, It's new ... but don't work on dm7025.....

That's right. I only see executables for ppc (up to dm7020) and i386. DM7025 has a complete other processor.

[südschwede]

Good work, CCcam runs here on a Nokia Dbox2, very fast Zapping

Beautiful clear ECM info

system: Viaccess (France Telecom)
caid: 0x500
provider: TPS (13E) (TPSCrypt2)
provid: 0x7c00
pid: 0x168
using: emu
emc time: 0.008

system: Kudelski SA
caid: 0x1801
provider: Digital+ Astra (19E)(Nagra 2)
provid: 0x4101
pid: 0x70c
using: emu
emc time: 0.004

Südschwede

[elpajare]

Any special config in CCcam.cgf ?

[pitkin]

Do prdele. It is not working at all on NA providers-B3V &D!SH