NewCS 1.16 + Mgcamd card updates

[dimsy]

Hi All,

I am having trouble getting my card updates trough client. I have a newcs running in XP (reader on phoenix mode) machine with a dreambox client (mgcamd). It doesn't look like card getting updated via the client.

I only error I can see through debug is:

:Card was not succusfully updated

Please help me to figure out what's going on.




Newcs (device portion):

<readers name="Card Readers">
<device>
<name>phoenix</name>
<type>phoenix</type>
<node>COM2</node>
<mhz>600</mhz> <!-- or 357 -->
<parity>even</parity>
<databits>8</databits>
<reset>invert</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>No</PTShandshake>
<crypto-special>No</crypto-special>
<carddetect>No</carddetect>
<newcamd_port>15021</newcamd_port>
<autosid>Yes</autosid>
<priority>hard</priority> <!-- hard is default -->
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>


Newcs (User setup):

<user>
<name>user1</name>
<password>user1</password>
<au>on</au>
<sidoverride>on</sidoverride>
<readers>
<allow>phoenix</allow>
</readers>
</user>


Mgcam setup ( main)

A: { 02 }
N: { 07 }
Q: { 15 }
G: { 01 }
R: { 03 }

[ubbe]

Hi
Try reset normal as newcs team says in newcs.xml-default
normal = phoenix
invert = smartmouse
Ubbe

[gosforth]

what about this?

"<carddetect>No</carddetect>"

[cwispy]

I doubt that there is going to be anything in the newcs.xml file wrong if the client is able to connect to it. If the server is wrong, it doesnt start listening on the port it is assigned. Id be more inclined to ask what type of card your running first and where your located as you may need either a different softcam or you may need a replace line.

[PacMan]

seem´s ur useing a irdeto card on it, i think its quite usual to get
:Card was not succusfully updated
if u´d wait a bit longer itl get updated

then allso u should change option A to 1

# AU
#    00 is ignored (default)
#    01 enable AU
#    02 AU Auto
A: { 01 }

that´l get it working

[dimsy]

I've tried Following options as you guys suggested.

newcs.xml:

<reset>normal</reset>
<carddetect>Yes</carddetect>

mg_cfg:

A: { 01 }

Debug reports following:

[ 07:58:23 ] [ Irdeto ] Card AU was not successfull
[ 07:58:23 ] [ 0604 ] Card EMM took: 0s 180000us

Doesn't look like it's updating the card. I am at a loss.



Currently reader on 6mhs phoenix mode. But when I try smartmouse mode I can't get newcs to load keys.

I tried setting the reader to 6mhz smartmouse mode. But even if I change the reset parameter to "invert". It doesn't load the keys.

Any help much appriciated.

[cwispy]

Cant load what keys? Tell us what card your running. Cant help unless we know what you have.

[PacMan]

Originally Posted by cwispy

Cant load what keys? Tell us what card your running. Cant help unless we know what you have.

heh u can quite clearly c from the log that´s a ->irdeto caid 0604 card <-


my 0606 card was "jammed" and didn´t take any updates in so i used a irdeto freecam to get it to work on the first channel i tried.. after that i removed it back to my newcs server and it works quite well and reseaves updates...

ur doing all the right things alltho the card wont update , i dunno

just try leaving it owernight on the channel

[dimsy]

Left it overnight running with no luck again.

PacMan: where can I get irdeto freecam?

[PacMan]

Originally Posted by dimsy

Left it overnight running with no luck again.

PacMan: where can I get irdeto freecam?

i would recomend to just try another emu and server.... like cardserver+newcamd it might work ....... if not contact the dealer who sold u that card and ask if its even supposed to be working .. then if it is just buy a irdeto cam

just try googling " irdeto cam "