Seca and cardserver

[Ad2003]

Hi ,
is there SPECIAL Setup for cardserver to mak my seca card working in my
Phoenix or dreambox internal cardreder.

coz i did a lot of try but alwas give me init failed

[cardserver 16:59:56] compiled Nov 28 2004, 15:09:22
[cardserver 16:59:56] Card 1/0 reset
[cardserver 16:59:57] Card 1/0 init Seca card, please wait
[cardserver 17:00:00] Card 1/0 reset
[cardserver 17:00:01] Card 1/0 init Seca card, please wait
[cardserver 17:00:04] Card 1/0 reset
[cardserver 17:00:05] Card 1/0 init Seca card, please wait
[cardserver 17:00:08] Card 1/0 init failed

any help ...please

regards

[Anakin_holland]

Well,

As for the phoenix-programmer, it has to run on 3,5 Mhz for a Seca-card.

It should, however, run fine in the internal cardreader.

Please post the type of dreambox and image. Also, please attach the file /var/tuxbox/config/cardserv.cfg. (On a 7020 this should be /etc/tuxbox/config/cardserv.cfg)

Best regards,

Anakin_holland

[Ad2003]

Originally Posted by Anakin_holland

Well,

As for the phoenix-programmer, it has to run on 3,5 Mhz for a Seca-card.

It should, however, run fine in the internal cardreader.

Please post the type of dreambox and image. Also, please attach the file /var/tuxbox/config/cardserv.cfg. (On a 7020 this should be /etc/tuxbox/config/cardserv.cfg)

Best regards,

Anakin_holland

Thank you Anakin for your help

This is my info
dreambox 7000
PI2 img
Newcamd 5.28

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER_NAME = cardserv
DEBUG_PORT = 14000
ADMIN_PORT = 14001
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
USER = root dreambox lan localhost 12000
DEBUG_INIT = no
DEBUG_NET = no
DEBUG_ECM = no
DEBUG_EMM = no
#
#
SERIAL_PORT = 1
TCP_PORT = 10000
EMM-G = no
EMM-S = no
EMM-U = no
SPECIAL_FEATURES = no

look forword for your reply.
Thank u

[Anakin_holland]

Ad2003,

I made some changes in the config:

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER_NAME = cardserv
DEBUG_PORT = 14000
ADMIN_PORT = 14001
ENTITLEMENT_PORT = 14002
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
USER = root dreambox lan localhost 12000
DEBUG_INIT = yes
DEBUG_NET = no
DEBUG_ECM = no
DEBUG_EMM = no
#
#
SERIAL_PORT = 1
TCP_PORT = 10000
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = yes

Please try again, with the card in the LOWER slot and the chip facing DOWN. I believe you allready did this, I just wanted to make sure.

If this doesn't work, maybe the chip is a bit dirty? Try cleaning it with a cotton-tip?

Good luck!

[Ad2003]

Originally Posted by Anakin_holland

Ad2003,

Please try again, with the card in the LOWER slot and the chip facing DOWN. I believe you allready did this, I just wanted to make sure.

If this doesn't work, maybe the chip is a bit dirty? Try cleaning it with a cotton-tip?

Good luck!

Yes.. you are the one
it was the card chip , i cleaned it and its working just fine now

Thank you very much Anakin_holland ..

My regards
AD