FFS put all newcamd thread here

[FullFTA]

Originally Posted by SecAvAtAr

hi,

There are no solution for use OSD_TIMEOUT like old newcamd (in emu panel - blue button) ? And anyone have succeeded to use it without inopportune reboot of enigma ?

best regards

I have the same pb but I'm able to configure with my PC the NEWCAMD. I remove all configurations than can deplay on screen messages but I have always the message on screen. I think they will deliver a new NEWCAMD6.1 without this message.

[FullFTA]

I'm disapointed because I configure 2 days the NEWCAMD6.0 with Hydra 7000 final 109, now it seams stable to record but impossible to remove this horrible debug message. This is my last config :
# /var/tuxbox/config/newcamd.conf
#
SHOW_ALL_CA_SYSTEMS = no
OSD = none
OSD_WAIT_TIME = 0

But I have also :
DEBUG_ECM = no DEBUG_EMM = no DEBUG_CWS = no DEBUG_CAM = no DEBUG_CAM_HEX = no SHOW_CW = no
SHOW_PAT = no SHOW_PMT = no SHOW_ECM = no SHOW_CAT = no SHOW_EMM = no SHOW_CWS_ECM = no
SHOW_CWS_EMM = no EMM_REPORT_WRONG_SIG = no

If some body have an idea or can confirm that is possible with hydra to remove tanks.

[Tosh]

Originally Posted by FullFTA

I'm disapointed because I configure 2 days the NEWCAMD6.0 with Hydra 7000 final 109, now it seams stable to record but impossible to remove this horrible debug message. This is my last config :
# /var/tuxbox/config/newcamd.conf
#
SHOW_ALL_CA_SYSTEMS = no
OSD = none
OSD_WAIT_TIME = 0

But I have also :
DEBUG_ECM = no DEBUG_EMM = no DEBUG_CWS = no DEBUG_CAM = no DEBUG_CAM_HEX = no SHOW_CW = no
SHOW_PAT = no SHOW_PMT = no SHOW_ECM = no SHOW_CAT = no SHOW_EMM = no SHOW_CWS_ECM = no
SHOW_CWS_EMM = no EMM_REPORT_WRONG_SIG = no

If some body have an idea or can confirm that is possible with hydra to remove tanks.

See above - remove OSD=none & osd_wait_time=0

add OSD_TIMEOUT = 0


Tosh

[djeghe]

this evening i will try the command...tnx a lot! I saw that others have the same problem (after reboot) with 7020 and hydra!!! But i don't understand exactly how to resolve....Maybe there is the problem with the 15 files....i launched the 2 comamnds but i didn't resolve the problem!
If will I install newcamd using telnet, will I have the same problem? Tnx

[FullFTA]

Extra good now I'm happy until next release !
It's ok now the message is removed

I have also configure the file priority to increase the channel zapping speed.

Thanks a lot TOD..

[Ad2003]

HI
anyone succeeded runing irdito2 card in updated cardserver.i386 ??

Thanks
regards

[kakadu]

Originally Posted by djeghe

this evening i will try the command...tnx a lot! I see that others have the sam problem (after reboot) with 7020 and hydra!!! But i don't understand exactly how to resolve....Maybe there is the problem of the 15 files....i launched the 2 comamnds but i don't resolve the problem?
If i will install newcamd using telnet i will have the same problem? Tnx

bye bye
kakadu

[weeder]

Hello Guys!

I try to run dyndnscd, but I get this message:
[dyndnscd Fri Jan 30 23:30:58 UTC 1970] Attempting to get current IP...read failed

Could you help me?

[bremze]

Guys, can anyone give me newcamd6 tar.gz file for latest hydra? Or at least the name of that file, so I could download it manually from the cpanel site.
Yes, I don't have internet connection to my dreambox!

[jura]

Hi, it's last version of the newcamd (with sugestion: FFS put all newcamd thread here)

Official release newcamd v6.01 full release

check recent.txt for answers to questions asked recently in forums

-------------------------------------------------------------------------------

Important: Please save this complete release, for future releases, we may
choose to include only those files, that have actually changed

-------------------------------------------------------------------------------

We noticed, there are still many files around that do NOT comply
to the distribution terms set below, particularly complete images with all
keys inside. We again ask uploaders to remove such files and we also ask
admins to not allow such files on their upload centers.

Further action might be taken in the future, if our rules about newcamd
distribution are continously violated.

-------------------------------------------------------------------------------

It is our firm believe that access to Free-TV is made way to easy for
people at the moment and we are seriously considering disallowing the
distribution of future newcamd releases inside flash images. We have been
following a public policy up until now, because we wanted to provide a free
alternative to the never ending greed of the commerical pirates. But we do
believe however, that we can ask everyone wanting to use our software, to get
out of their TV armchairs and pause the growing of their asses (to quote the
writer of a certain FAQ) long enough to learn how to upload a couple of files
to their boxes via ftp, read the supplied documentation and edit a couple of
keyfiles. Everybody can learn how to do that easily, and we mean EVERYBODY.
We feel that anyone claiming the contrary, is just too lazy to even try.
To sum up, we believe all the emu images and full automatic internet key
downloads at the push of a button are hurting the Free-TV community more then it
serves it by forcing Pay-TV providers to implement stronger countermeasures and
we would ask all image makers out there to rethink their position.

-------------------------------------------------------------------------------

And since we are discussing politics already, some recent news bulletins on
several news services indicated the European Union thinking about forcing Pay-
TV providers to offer their services beyond national borders to anyone who wants
a subscription. We strongly support such a move and we pledge that the emu and
cardsharing facilities in newcamd would be discontinued if Pay-TV providers
would start to offer their services internationally under the same conditions
they offer it to national residents. In particular:

1. same choice and contents of all channel packages (no stripped-down
international subscriptions like Digiturk Euro).
2. same prices as for national customers

It was never the intention of the newcamd Team that people would use it to steal
the services of their national Pay-TV provider (or any other provider they could
officially subscribe to). If and when everyone would be able to officially
subscribe to any Pay-TV package he wants to, under the same conditions as
everyone else and regardless of where he lives, we would feel newcamd becoming
kind of obsolete. The only reason why we make newcamd support emu and card
sharing is to overcome this discrimination by Pay-TV providers to offer official
subscriptions to national residents only.

-------------------------------------------------------------------------------

About Sky NDS

Well, after the gbox team made it public in their usual charming manner, which
is only for their elite group of friends (aka to people that crawl up their
aces) and to people who pay for access to their card sharing network, and after
also a patched cardserver appeared for Sky NDS (which by the way is indeed
patched, we had nothing to do with it, we - so far - never gave away any
cardserver binary supporting Sky to anyone), we feel, there is no point of
holding it back any longer.

We feel however, the gbox team and the person that patched cardserver and gave
it away, so that it finally found its way to the public domain, did not act very
clever for two reasons:

1. Both solutions support card sharing, which doesn't really work for both
BSkyB and Sky Italia for technical reasons. Anyone, who's tried it over a
high latency Internet connection or where more than clients shared a card,
will have noticed, he will get picture dropouts quite regularly. So what's
the point of releasing something, that doesn't work properly and will only
piss off the Pay-TV provider and make it introduce counter measures more
quickly.
2. Regarding Sky Italia: Releasing a cardserver for the NDS cards prematurely,
this is, while a perfectly good solution for card sharing this provider is
still working perfectly fine (Seca2). So, while the NDS server so far wasn't
really needed yet, because Seca2 worked just as well, Sky Italia had time to
to analyse the existing solutions and come up with a counter measure before
Seca2 is even deactivated.

We've thought, the camds are around to improve the digital tv experience for
the ambitioned hobbiest, who are discriminated by the Pay-TV providers for not
living in the correct country. But the release of both gbox and the patched
cardserver were certainly counter-productive when trying to keep access up to
such channels for as long as possible.

Of course, we know, that at least the gbox team is more interested in making
money for themselves as for the common good. We know, many of you readers will
object now to this statement, and yes, we've read the latest statement of the
gbox makers too, claiming there's absolutely no money involved and that they've
absolutly nothing against everybody using gbox. The fact of the matter is, this
gbox statement is not believeable whatsoever. For once, we know a guy in one of
the former Yugoslav countries, that has admitted to selling access to gbox
cardsharing (newcamd too possibly). And this guy is always the first person to
have the newest "non-public" gbox releases. We're sorry, but we're not so naive
to believe, that there is even the remote possibility that this could be a
coincidence. And what about that RSA protection of the nds camcrypt in gbox?
Surely if the gbox team wouldn't have any objections against everybody using
gbox, like they claim, they wouldn't have bothered with such a protection in
the first place. And what about the gbox card sharing protocol? Biggest secret
of all time. We even hear regularly, they change it as soon as someone
"unauthorized" has figured out, how it works. Now, does that sound like the
work of people, who don't care about who's using gbox? Why do we have two
totally incompatible sharing protocols now? Do you think, we wanted to make
everybodies life miserable by inventing a second, incompatible protocol? If the
gbox protocol had been available, we would certainly not have written cardspider
but instead adapted newcamd & cardserver to use as client/server for gbox
sharing.

You may have noticed, that contrary to the gbox statement, we're not using any
nicknames are to name the people, we're talking about, because even while we're
not agreeing with their actions, we don't want to cause any trouble for them by
naming them. We do ask however, why so many people (board admins etc) believe,
the gbox people must be treated fairly and everybody should comply with their
wishes, while the gbox people go around naming others, possibly causing trouble
for them, which is not very fair of them at all.

Anyway, back to Sky NDS. We've decided to release a solution for BSkyB and Sky
Italia now, because other solutions are public anyway, but we didn't include
cardsharing for those two providers, for reasons explained above. Both providers
are included in betad, so the same restrictions apply to them as they do for
Premiere (no sharing, no EMM blocking). Enjoy it while it lasts, the NDS
camcrypt is very versatile, Sky can very fast make minor changes to it without
any need to change any hardware, and if that happens, don't expect any fast
updates. We have no intension whatsoever, getting into a cat-and-mouse game with
Sky, updating the camcrypt every two weeks or so (and believe us, the camcrypt
is versatile enough to support such a scenario).

"But why didn't you guys at least release a betad for BSkyB before?" we hear
you ask. "There never was another ca system on BSkyB than NDS and I thought
your goal was to improve the digital tv experience for the ambitioned
hobbiest." There are 2 very good reasons for it:
1. As indicated before, Sky can change the camcrypt at any time easily, if they
wanted to. We wanted to avoid half of the UK going out to buy Dreamboxes to
watch Sky on, while we know very well, that there is a good chance, it would
work only for a couple of weeks. The authors of the other solutions didn't
warn you about this, we feel that we have to.
2. So far newcamd worked only on a very limited number of set top boxes, most
noticeably the Dreambox (although newcamd works nicely on dbox2 or i386 DVB-S
cards too, almost nobody, at least outside of Germany, where the dbox2 was
sold, uses newcamd on these platforms). We didn't want to influence any
market shares for any of the competing manufacturers with our software.
Now this isn't a problem anymore, because with V6.00 we've introduced a box-
independent api, so anyone can write support for different boxes without the
need to have any source code from newcamd (see below).

Rgds