FFS put all newcamd thread here

[welshman]

Hi all, I notice that many people are deleting the 15 byte file that some of the installations are inserting in /var/tuxbox, this is in fact a shortcut to /var/scce which allows you to leave scce etc in the normal place.

Rgds, Welshman..

[ma-gyver]

Originally Posted by welshman

Hi all, I notice that many people are deleting the 15 byte file that some of the installations are inserting in /var/tuxbox, this is in fact a shortcut to /var/scce which allows you to leave scce etc in the normal place.

Rgds, Welshman..

Hi Welshman,

Nice to see you here, there a long time not reading you.

Very good and pertinent remark !

[Gaj1]

Originally Posted by welshman

Hi all, I notice that many people are deleting the 15 byte file that some of the installations are inserting in /var/tuxbox, this is in fact a shortcut to /var/scce which allows you to leave scce etc in the normal place.

Rgds, Welshman..

Hi!.

Also the Reboot, not only standby, after installation are forgotten.
Remember that, it will save users a lot of trouble.

[welshman]

Originally Posted by ma-gyver

Hi Welshman,

Nice to see you here, there a long time not reading you.

Very good and pertinent remark !

Hi ma-gyver, I am always here lurking somewhere in this group, I try to only post a message when I have something worth saying

[lor]

Just tried the Newcamd v6 and betad in my 7000, put betad.cfg in the var/tuxbox/config directory and inserted the 10 digit UK BOXID then inserted the legit card in the upper slot (ser 0) then restarted the box but when betad starts I just get "card init" then "init failed" The UK card is fine and works great in normal box.

What am I doing wrong?

Chris

[welshman]

Originally Posted by lor

Just tried the Newcamd v6 and betad in my 7000, put betad.cfg in the var/tuxbox/config directory and inserted the 10 digit UK BOXID then inserted the legit card in the upper slot (ser 0) then restarted the box but when betad starts I just get "card init" then "init failed" The UK card is fine and works great in normal box.

What am I doing wrong?

Chris

Hi Chris, we have managed to get most channels working without the box ID
however, it is the cardserv.cfg file you need to use your card, I have attached a working file for you, place it in /var/tuxbox/config and put the card in the top slot (contacts down).

Rgds, Welshman.

[lor]

Originally Posted by welshman

Hi Chris, we have managed to get most channels working without the box ID
however, it is the cardserv.cfg file you need to use your card, I have attached a working file for you, place it in /var/tuxbox/config and put the card in the top slot (contacts down).

Rgds, Welshman.

Thanks, worked first time! Pity only works with betad. However add cs2gbox and it's a different story

Chris

[skinnerus]

using hydra beta with newcamd 6.0 and offical s** uk card, i can get cardserv started using telnet. everything clears fine that i have subscibed to etc. I can then turn to different sattelites etc switch to other cams etc and it still works normally when i come back to 28.5. but when i rebot dreambox i am losing the settings in cardserv.cfc etc and it will not start unless re edit the cardserv kill all the proccesses and restart cardserv using telnet. I did not have this problem when i was running 5.28 have tried the latest config files etc but no success any help on this would be welcome as its driving me nuts as i prefer to totally shut my box down when im out.

no problems when using sdt image with newcamd 6.0 but i prefer hydra which is on the flash

[Lowrider_france]

I had the same problem, but it was solved exactly as described in the thread. Note that the newcamd config file must be in tuxbox/config. If you have had earlier newcams, you might have other config files in other locations. Only a thought.....

[SecAvAtAr]

hi,

There are no solution for use OSD_TIMEOUT like old newcamd (in emu panel - blue button) ? And anyone have succeeded to use it without inopportune reboot of enigma ?

best regards