network problem , please your helpings ,guys

[bmb1425]

dreambox network setting:
Ip:192.168.0.5
Net Mask:255.255.255.0
Name Server:192.168.0.1
Gateway:192.168.0.1

LAN COMPUTER SETTING:
Internet Protcol (tcp/ip)
Ip Address:
192.168.0.1
Subnetmask:
255.255.255.0
When I use Flash wizard ,it displays : unresolved chick parameters wich cannot be connected between the computer and dreambox.
cable : rj45

There is a red (x) on the icon of network
When I press Enable then it shows cable network unplugged

[bmb1425]

I think there is a problem in the network setting but i dont know how to solve it.

[oudeis]

Originally Posted by bmb1425

dreambox network setting:
cable : rj45

There is a red (x) on the icon of network
When I press Enable then it shows cable network unplugged

What kind of cable are you using: straight or crossed?
* when you connect the DB directly to your PC you normally use a crossed cable
* in case your network card in your PC supports auto-sense you can use either...
* with a hub, you use mostly straight cables

Hope it helps...

[john736]

try ip dreabox 100.100.100.2
your cable it must be crossed

[jorges]

Your IP addresses look fine if you are using a dial up connection. If you are using a router you will need different IP addresses.
Have you checked the box to set up the LAN on your Dreambox Connections setup page?
Also check you have the correct cable as posted above
Which operating system are you using

[bmb1425]

Win Xp
The Cable I Use Has Eight Wires From Both Side

[xelayb]

Hi,

First, if there is a led on network card, check if it is on or off . If off, your cable is bad. You need a cross cable or a hub between dream and PC. But, for now, try it :

In Command Prompt XT : ping 192.168.0.5

If must see the 2 answer :
a) Reply from 192.168.0.5: bytes=32 time<1ms TTL=255 (Your network is OK.)
b) Request timed out. (Your network is bad)

[bmb1425]

THANK YOU SO MUCH GUYS.
WHEN I USE Intel(R) PROSET TO IDENTIFY THE ADAPTER BY CLICKING START, IT SHOWS A GREEN LED FLASHING
I PUT THAT PING 192.168.0.5 AND IT SHOWS ,PINGING 192.168.0.5 WITH32 BYTES OF DATA
TIME OUT
TIME OUT
AND ALSO DESTINATION UNREACHABLE

[bmb1425]

The Mother Bord I Have Is Called 8knxp The Network Card Is Embeded In The Mother Board


Can Any Body Shows Me A Real Photo For The Cable

[xelayb]

Hi,

After 2º timeout press CRTL C and use the command: arp -a
If this command returns 1 IP (MAC Address Your PC) the problem is probably the cable.