gemini 2.30 7025

vangos75 · #1 (**permalink**) 05-08-2007

Has anybody encountered any problems with the new image? i tried to install it couple of times but never worked. what i mean i use dream up as always and instead i get the same image as my existing. is there any problem in the file of 2.30? i downloaded from ihad and dreambox world!!!!!!! Weired, isn't it?

papako · #2 (**permalink**) 05-08-2007

What is your problem?
Can you see the Gemini logo?
The first boot it takes a lot of time to load.
Can you install and work the 2.20 again or not?

Try to upload the image with the web browser.

jgarg · #3 (**permalink**) 05-08-2007

No problem at all,2.3 works ok

cozierj · #4 (**permalink**) 05-08-2007

I also installed Gemini 2.30 on my DM7025. However when I do a satellite scan I get "no service" . I have Can any one help?

vangos75 · #5 (**permalink**) 05-09-2007

Quote:

Originally Posted by papako

What is your problem?
Can you see the Gemini logo?
The first boot it takes a lot of time to load.
Can you install and work the 2.20 again or not?

Try to upload the image with the web browser.

NE EXO KSANAVALI TO 2.20 KAI DULEVI MIA XARA.
POS TO KANIS INSTALL ME TO WEB BROWSER. EGO PANTA XRISIMOPOIO TO CROSS CABLE. EFXARISTO

**kosmojim** · #6 (**permalink**) 05-09-2007

English here and not Caps thanks

vangos75 · #7 (**permalink**) 05-10-2007

I have used 2.20 and works just fine. how do you install it via web browser? i usually use the cross cable and it takes forever.
Thanks

cozierj · #8 (**permalink**) 05-10-2007

I am now able to find satellite services with my Gemini 2.30 when scanning. However when the scan is finished and I press ok the channels are all cleared. No channel guide ,Any ideas ?

papako · #9 (**permalink**) 05-12-2007

Quote:

Originally Posted by vangos75

I have used 2.20 and works just fine. how do you install it via web browser? i usually use the cross cable and it takes forever.
Thanks

I have problems with 2.30 too. I have big delays with the recordings. I will try LT

To flash the 7025 from your browser you need to have a DHCP at your network. Probably if you have ADSL your router ca be a DHCP server.
Now close your dream. Hold down the up or down key and open your box.
If there is a DHCP you will see an IP address at the screen of your box.
Use this IP to a browser and follow the steps

Read this: http://www.dream-multimedia-tv.de/dm...ng_browser.php

vangos75 · #10 (**permalink**) 05-14-2007

i appreciate your help. thanks again