Cardreaders doesn´t work

[Robban?]

I can´t get the cardreaders to read read my Vi***t eller C***x card in my7025 with NewCS .
This is how the log looks like when starting newcs.mips-7025.

And yes i have stopped dccamd.

root@dm7025:/usr/bin# newcs.mips-7025
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: all
output: file,all
logger config: level 1 type 255 output 255
log file: /tmp/newcs.txt
udp log: host 192.168.1.10 port 1000
Cannot connect UDP socket to 192.168.1.10:1000
logger: cant connect udp to 192.168.1.10:1000, udp log disabled
tcp port: 3001
[ 10:28:16 ] [ Box detect ] Box type 1
[ 10:28:16 ] [ Config ] Option <mhz> for device 0 (lower) not present, defaultig to 357
[ 10:28:16 ] [ Config ] Option <parity> for device 0 (lower) not present, defauting to ODD
[ 10:28:16 ] [ Config ] /dev/sci0 ECM priority: hard
[ 10:28:16 ] [ Config ] Option <mhz> for device 1 (upper) not present, defaultig to 357
[ 10:28:16 ] [ Config ] Option <parity> for device 1 (upper) not present, defauting to ODD
[ 10:28:16 ] [ Config ] /dev/sci1 ECM priority: hard
[ 10:28:16 ] [ Newcamd ] Server name: cardserv
[ 10:28:16 ] [ Newcamd ] Des key DC92A172E4BD2293ED24582D23CC
[ 10:28:16 ] [ Newcamd ] User 2: digsat, Pass: user, Host none, Port: 0, Au: On Spider allowed: No
[ 10:28:16 ] [ Newcamd ] User 3: User1, Pass: Pass1, Host none, Port: 0, Au: On Spider allowed: No
[ 10:28:16 ] [ Newcamd ] User 4: User2, Pass: Pass2, Host 192.168.1.1, Port: 1445, Au: Off, Spider allowed: No
[ 10:28:16 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 10:28:16 ] [ ECM Cache ] Initialising Cache with 20 entries
[ NewCS ] Process id 1510
[ 10:28:16 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 10:28:16 ] [ Sci ] Opening device /dev/sci0
[ 10:28:16 ] [ Sci ] Could not get device ¨s
[ 10:28:16 ] [ Loader ] Reset failed ...
[ 10:28:16 ] [ Loader ] Starting Newcamd Server on port 10000
[ 10:28:16 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 10:28:16 ] [ Sci ] Opening device /dev/sci1
[ 10:28:16 ] [ Sci ] Could not get device
[ 10:28:16 ] [ Loader ] Reset failed ...
[ 10:28:16 ] [ Loader ] Starting Newcamd Server on port 10001
[ 10:28:16 ] [ NewCS ] Ready to GO!

It doesn´t matter if i use upper or lower slot.

Here is another log.
.----------------------------------------------------------------------------.
| Status | CAID | Enabled | Exported | Mhz | Node | Reader |
|----------|------|---------|----------|-----|----------------|--------------'
| Empty | 0000 | Yes | Yes | N/A | /dev/sci0 | 0 (lower)
| Empty | 0000 | Yes | Yes | N/A | /dev/sci1 | 1 (upper)
'-------------------------------------------------------------'---- --- -- - -

any suggestions?
is the box broken?


\Robban

[Salde]

Nope, your box is just fine.

You have to wait for working emulator to get cards working.

Mine Viashit-card is working same way on my 7025 but inxtc-card works ok because there is emulator for that and inxtc-card doesn't get any keys OTA. I think.

[Robban?]

But it is supposed to detect the cards anyway.
so i can use it as a cardserver.
I don´t need an emu for that.
isn´t that right?

[axachi]

eh are you going to share+.. I would install all this on a server/pc and do cardsharing from ther. use an old computer. best way to go. download newcs 1.06 has support for win32.

ofcourse you need cardreaders but hell they are cheap...

http://www.adteknik.se/english/usbphoenix.htm

I got mine from her

Then connect all to that computer. including your own box.

[axachi]

But all you have to do to get org cards to work. you need a emu. install newcamd and put CO***x in upper slot should work fine.

[peram]

Hi.

After a lot of fiddeling I've managed to get my 7025 to detect and use both my original cards for the mentioned providers. Basically this is what I've done :

- download the newcs_Evocamd from digsat
- login to your box and do a

- killall newcs.mips-7025

- Put Via*** in the *lower* reader
- restart newcs.mips-7025 from your terminal session and you should see this :

[ 19:49:03 ] [ Box detect ] Box type 1
[ 19:49:03 ] [ Config ] Option <mhz> for device 0 (lower) not present, defaulting to 357
[ 19:49:03 ] [ Config ] Option <parity> for device 0 (lower) not present, defaulting to ODD
[ 19:49:03 ] [ Config ] /dev/sci0 ECM priority: round
[ 19:49:03 ] [ Config ] Option <mhz> for device 1 (upper) not present, defaulting to 357
[ 19:49:03 ] [ Config ] Option <parity> for device 1 (upper) not present, defaulting to ODD
[ 19:49:03 ] [ Config ] /dev/sci1 ECM priority: round
[ 19:49:03 ] [ Newcamd ] Server name: cardserv
[ 19:49:03 ] [ Newcamd ] Des key 0102030405060708091011121314
[ 19:49:03 ] [ Newcamd ] User 2: local, Pass: local, Host none, Port: 0, Au: On, Spider allow[ 19:49:03 ] [ EMM Cache ] Initialising Cache with 2 entries^M
[ 19:49:03 ] [ ECM Cache ] Initialising Cache with 10 entries^M
[ 19:49:03 ] [ Loader ] Reader type 5 on node /dev/sci0^M
[ 19:49:03 ] [ Sci ] Opening device /dev/sci0^M
[ 19:49:03 ] [ Sci ] CARD_DETECT for sci returned 1^M
[ 19:49:04 ] [ Loader ] Unknown card
[ 19:49:04 ] [ Loader ] Trying Irdeto (T=14)
[ 19:49:04 ] [ Loader ] Reader type 5 on node /dev/sci0^M
[ 19:49:04 ] [ Sci ] Opening device /dev/sci0^M
[ 19:49:04 ] [ Sci ] CARD_DETECT for sci returned 1^M
[ 19:49:05 ] [ Loader ] Init NDS card
[ 19:49:06 ] [ Keyman ] Adding key type 0 on Provider 000000 for caid 090F ID=0^M
[ 19:49:06 ] [ Keyman ] Adding key type 1 on Provider 000000 for caid 090F ID=0^M
[ 19:49:08 ] [ Loader ] Card 090F on port  /dev/sci0 ready^M
[ 19:49:08 ] [ Loader ] Starting Newcamd Server on port 10000^M
[ 19:49:08 ] [ Loader ] Reader type 5 on node /dev/sci1^M
[ 19:49:08 ] [ Sci ] Opening device /dev/sci1^M
[ 19:49:08 ] [ Sci ] CARD_DETECT for sci returned 1^M
[ 19:49:09 ] [ Loader ] Init Conax card
[ 19:49:09 ] [ Keyman ] Adding key type 0 on Provider 000000 for caid 0B00 ID=0^M
[ 19:49:09 ] [ Keyman ] Adding key type 1 on Provider 000000 for caid 0B00 ID=0^M
[ 19:49:09 ] [ Loader ] Card 0B00 on port  /dev/sci1 ready^M
[ 19:49:09 ] [ Loader ] Starting Newcamd Server on port 10001^M
[ 19:49:09 ] [ NewCS ] Ready to GO! :)

Ypu might have to do this a couple of times, swapping the cards for each try. This has worked for me, but as allways YMMV.

All this info is taken from the digsat forums, so many thanks to them !

Hope this helps.

regs,

peram