Remote control

axel89 · #1 (**permalink**) 02-11-2005

After installation of 1.09, using the remote control I'm unable to switch on the DB7000. Swithing on using the button ALL funcions of remote control works perfectly. The only function does't works is SWITCH ON BUTTON. Why ????

MrBandwidth · #2 (**permalink**) 02-11-2005

It does work! However on certain hardware revisions there is a delay in operation!

Try to press the button several times but be patient! You may have to press up to 7-8 times!
This is a known bug in FP1.04 and should be corrected in final release.
It also ONLY occures in wake up from deep standby!

axel89 · #3 (**permalink**) 02-11-2005

In standby works well. I does't work when it's shutdown mode.(I does means FP1.04?)

MrBandwidth · #4 (**permalink**) 02-11-2005

That's exactly what it means! (See above)
Like I said, it will be fixed in final 1.09 release! (current one is public beta)

axel89 · #5 (**permalink**) 02-11-2005

Ok, I understood. Problem partially solved with DM700_CVS_09_02_2005_1.09.img.

axel89 · #6 (**permalink**) 02-11-2005

Same problem with DM700_CVS_09_02_2005_1.09.img

MrBandwidth · #7 (**permalink**) 02-11-2005

Yes, but nobody said it'll be fixed in this CVS compilate ....
You got to wait for the 1.09 final released by DMM and something compiled from the public CVS

axel89 · #8 (**permalink**) 02-11-2005

Reloaded 108 in flash and I have same problem now..so do not depends of fw.

MrBandwidth · #9 (**permalink**) 02-11-2005

It's NOT the firmware! It's the FP1.04 (the Front Processor upgrade to version 1.04)
No matter what firmware you load, you will have this little disturbance until next FP update to 1.05 which has been sheduled for FW1.09 final

Just be patient PLEASE

axel89 · #10 (**permalink**) 02-11-2005

Ok, many thanks, bye bye.