I found this great guide at
www.satnet.ch and is made by Hubi
It describes how to install newcamd on an official image!!!
Although is made for an 7000s I think it works on a 5620s as well.
here goes:
HOW-TO INSTALL NEWCAMD 5.18 ON ORIGINAL DMM IMAGES
explains how to install newcamd 5.18 on original images, WITHOUT UNPACKING THEM,
and without headaches ))
Only 15 steps:
1) install an original DMM image (I used latest beta 108_2)
2) Create directory /var/bin, from Telnet:
mkdir /var/bin [enter]
3) On newcamd 5.18 zip (unzipped) archive, rename the file newcamd.ppc to
newcamd and copy it to /var/bin (with a FTP proggy)
4) On newcamd 5.18 archive, rename the file betad.dream to betad and copy it to
/var/bin (with a FTP proggy)
5) On newcamd 5.18 archive, rename the file cardserver.dream to cardserver and
copy it to /var/bin (with a FTP proggy)
6) Now give permissions 755 to all these files just copied, from Telnet:
chmod 755 /var/bin/* [enter]
7) Create directory /var/lib, from Telnet:
mkdir /var/lib [enter]
Get (from newcamd archive) the library "libcrypto.so.0.9.7" and put it to
/var/lib (with a FTP proggy)
9) Now the hardest part... ))
Copy the following lines, all together.
Then paste them into Telnet window and press [enter] key, when Telnet window end
scrolling.
These lines will build the 3 files needed for configuring newcamd and cardserver
(with original cards), and the init file for starting emu and cardserver at
boot.
10) let's start with "newcamd.conf", all needed settings:
CFG="/var/tuxbox/config/newcamd.conf" && \
echo "DEMUX_API = 2" > $CFG && \
echo "BOX_TYPE = DM7000" >> $CFG && \
echo "CONTROL_WORD_DEVICE = CA" >> $CFG && \
echo "CA_API = 3" >> $CFG && \
echo "GTX_OUTPUT_MODE = 16" >> $CFG && \
echo "PMT_UPDATE_WATCH = no" >> $CFG && \
echo "EMU = yes" >> $CFG && \
echo "PREFER_EMU = yes" >> $CFG && \
echo "DISABLE_CAM = yes" >> $CFG && \
echo "CAM_CASYS = 17" >> $CFG && \
echo "AU = yes" >> $CFG && \
echo "SHOW_ALL_CA_SYSTEMS = no" >> $CFG && \
echo "OSD = none" >> $CFG && \
echo "OSD_WEB_LOGIN = root:dreambox" >> $CFG && \
echo "CA_INFO_FILE = /tmp/cainfo.txt" >> $CFG && \
echo "DEBUG_ECM = no" >> $CFG && \
echo "DEBUG_EMM = no" >> $CFG && \
echo "DEBUG_CWS = no" >> $CFG && \
echo "DEBUG_CAM = no" >> $CFG && \
echo "DEBUG_CAM_HEX = no" >> $CFG && \
echo "SHOW_CW = no" >> $CFG && \
echo "SHOW_PAT = no" >> $CFG && \
echo "SHOW_PMT = no" >> $CFG && \
echo "SHOW_ECM = no" >> $CFG && \
echo "SHOW_CAT = no" >> $CFG && \
echo "SHOW_EMM = no" >> $CFG && \
echo "SHOW_CWS_ECM = no" >> $CFG && \
echo "SHOW_CWS_EMM = no" >> $CFG && \
echo "EMM_REPORT_WRONG_SIG = no" >> $CFG && \
echo "OSD_WAIT_TIME = 2000" >> $CFG && \
echo "DEFAULT_CW_DELAY = 500" >> $CFG && \
echo "RELOAD_CONFIG_ON_ZAP = yes" >> $CFG && \
echo "RELOAD_KEYLIST_ON_ZAP = no" >> $CFG && \
echo "CWS = dreambox 10000 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13
14 lan cardserver" >> $CFG && \
echo "CWS = dreambox 10001 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13
14 lan cardserver" >> $CFG && \
echo "CWS_CONNECT_TIMEOUT = 20" >> $CFG && \
echo "CWS_INCOMING_PORT = 12000" >> $CFG && \
echo "CWS_DEBUG_PORT = 12001" >> $CFG && \
echo "ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00" >> $CFG
11) and now cardserv.cfg - same as before: remember to press [enter] after
pasting of the lines:
CFG="/var/tuxbox/config/cardserv.cfg" && \
echo "DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14" > $CFG && \
echo "SERVER_NAME = cardserver" >> $CFG && \
echo "DEBUG_PORT = 12002" >> $CFG && \
echo "ENTITLEMENT_PORT = 12003" >> $CFG && \
echo "ADMIN_PORT = 12004" >> $CFG && \
echo "ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00" >> $CFG
&& \
echo "USER = root dreambox lan dreambox 12000" >> $CFG && \
echo "SERIAL_PORT = 0" >> $CFG && \
echo "TCP_PORT = 10000" >> $CFG && \
echo "EMM-G = yes" >> $CFG && \
echo "EMM-S = yes" >> $CFG && \
echo "EMM-U = yes" >> $CFG && \
echo "SPECIAL_FEATURES = yes" >> $CFG && \
echo "SERIAL_PORT = 1" >> $CFG && \
echo "TCP_PORT = 10001" >> $CFG && \
echo "EMM-G = yes" >> $CFG && \
echo "EMM-S = yes" >> $CFG && \
echo "EMM-U = yes" >> $CFG && \
echo "SPECIAL_FEATURES = yes" >> $CFG
12) AND, finally... ))
the start file (init).
We can't obviously edit the standard rcS file, because we haven't unpacked the
image, as our goal is to install newcamd 5.18 without unpacking... ))
So, we will use /var/etc/init instead.
Here's Our last cut&paste for building /var/etc/init:
IN="/var/etc/init" && \
echo "touch /tmp/.enigma" > $IN && \
echo "while [ -e /tmp/.enigma ]" >> $IN && \
echo "do" >> $IN && \
echo "rm -rf /tmp/camd.socket" >> $IN && \
echo "/var/bin/cardserver" >> $IN && \
echo "/var/bin/newcamd" >> $IN && \
echo "/bin/enigma" >> $IN && \
echo 'ret=$?' >> $IN && \
echo 'case $ret in' >> $IN && \
echo "0)" >> $IN \
echo "rm /tmp/.enigma" >> $IN && \
echo "/sbin/halt" >> $IN && \
echo ";;" >> $IN && \
echo "3)" >> $IN && \
echo "killall -9 newcamd" >> $IN && \
echo "killall -9 cardserver" >> $IN && \
echo "rm /tmp/.enigma" >> $IN && \
echo "umount /var" >> $IN && \
echo "umount /hdd" >> $IN && \
echo "sleep 2" >> $IN && \
echo "/tmp/reboot" >> $IN && \
echo ";;" >> $IN && \
echo "4)" >> $IN && \
echo "rm /tmp/.enigma" >> $IN && \
echo "/sbin/reboot" >> $IN && \
echo ";;" >> $IN && \
echo "*)" >> $IN && \
echo ";;" >> $IN && \
echo "esac" >> $IN && \
echo "killall -9 newcamd" >> $IN && \
echo "killall -9 cardserver" >> $IN && \
echo "done" >> $IN && \
echo "/sbin/reboot" >> $IN && \
chmod 755 $IN
13) If you want, you can check now for the presence of the three auto-builded
files:
/var/tuxbox/config/newcamd.conf
/var/tuxbox/config/cardserv.cfg
/var/etc/init
14) Restart Dreambox!
15) DONE!!! After restarting, you'll have an original image with Newcamd 5.18
installed and working.
It is that easy!!
NOTE:
If you do flash erase, you will lost all the insterted and edited files... so...
DON'T do flash erase!
New Keys New Files go to the Web Page
Seite 3
HOW-TO INSTALL NEWCAMD 5.18 ON ORIGINAL DMM IMAGES
----------------------------------------------------------------------------
http://www.satnet.ch/file/index.php
----------------------------------------------------------------------------
http://64.246.49.102/omega/index.php
----------------------------------------------------------------------------
by HB
Hubi90
Cheers
Linear Mode
