Dm 5620 Die? Help Please

[maxpreviti]

Hi , my DM 5620 not boot. Reamain continously in "5600 boot".
I have try to ulpoad to DM and download from DM all image i know.
HYDRA, SF, ORIGINAL, TEMINATOR, I HAVE A DREM... , pratically all!!!
But mi DM 5620 at boot (connected via telnet on Serial 1) tell me:
.....
D - Display Configuration
S - Save Changes
0 - Exit Menu and Boot Application
->0
Installed RAM: 48 MB
Checking RAM between 0x00000000 and 0x01FFFFFF
Checking RAM between 0xA0000000 and 0xA0FFFFFF

System RAM check complete
Booting from [FLASH] Application in Flash...
Program exception
SRR0=00000000 SRR1=00000000 ESR=00000000

Die ... :-(

Why this error ?? Wath happend??
My DM 5620 are DIED??

Please help me.

I have tried, suggested by michelangelo, the erase.img but nothing..
Ah, i forgot, nothing appear on screen while dm 5620 is booting.
BLACK SCREEN.
Work only the bootloader and flash is not damaged...
Reapeat .. please help me! TANKS AT ALL!!!!

[davelis]

I had exactly the same problem with the first DM that I bought.

If you cannot get anything on the screen and if you keep getting the 5600 boot then you may have damaged the flash. This could happen for example if an upload was interrupted.

Now I think this can only be fixed using a CAS interface but I suggest that you take it back to the manufacturer.

I alse remember reading a DIY fix it article somewhere (whose solution was very risky).
I can try and find it if you want but I don;t recommend it.

[Astra_Boy]

When you connect via Hyperterminal and press "D" for Display configuration what does it say

[maxpreviti]

Originally Posted by davelis

I had exactly the same problem with the first DM that I bought.
[....................................]
I alse remember reading a DIY fix it article somewhere (whose solution was very risky).
I can try and find it if you want but I don;t recommend it.

But, if the flash, are damaged, why dreamUp upload to my DM 5620 the image with 0 result (Flash Success)??

And i have a friend . This friend have a CAS interface! You think are simple or complicated the process to reanimate DM 5620!

I have a far experience with goldbox reanimation!

Please do you know any site (or forum) that explain how reanimate a Dreambox with CAS interface? And if you say ... post me please.

I am italian exscuse my english ... and very very very tanks for all!!!

MAX

[maxpreviti]

I have downloaded a image for DM 7000.
A RuDream image.
I konw my risk to upload this image on my DM 5620 but i wanna make this try!

Is the last try before send my Dm 5620 to vendor.

In any case the bottloader or the flash is corrupted.

And the only way is the CAS interface.

A question... in this case the vendor replace the drembox???
My DM 5620 is under warranty.

Tanks

[Astra_Boy]

Originally Posted by Nokia_Rulez

When you connect via Hyperterminal and press "D" for Display configuration what does it say

Ill ask you again one more time - what does it say in hyperterminal when you press D for display config ???????

[maxpreviti]

Originally Posted by Nokia_Rulez

Ill ask you again one more time - what does it say in hyperterminal when you press D for display config ???????

My Dm 5620 when press D in hyperterminal dispay this ....

--- Device Configuration ---
Power-On Test Devices:
000 Enabled System Memory [RAM] (originally "Disabled" but enabled by myself)
002 Disabled Ethernet [ENET]
----------------------------
Boot Sources:
001 Enabled Application in Flash [FLASH]
002 Disabled Ethernet [ENET]
local=0.0.0.0 remote=255.255.255.255 hwaddr=0009341eb56f
003 Disabled Serial Port 1 [S1]
Baud = 9600
----------------------------
Automatic Boot: Enabled
----------------------------
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
7 - Toggle Automatic Boot
D - Display Configuration
S - Save Changes
0 - Exit Menu and Boot Application
->

Tanks 1000!

Work only this Dream loader .. and only after i perform a ERASE from DreamUP
or when install original rel106.img image (pressing at start 2 Enter).
If a don't press enter, in Hyperterminal appear only this text "Dreambox DM 5620" with black TV screen.

I don't konw the cause of this crash.... I have "Only" turn on the dreambox for watching tv, (the image loaded in that moment are "I have a dreambox 5620 emu v1.1").
The logo "Loading" at boot appears on TV in grayscale (not in color) and the LCD of 5620 Dyplay "--.--" then the 5620 crash!!
I turn off the dreambox from rear I/O button and re-turn on.
The DM 5620 stay in "5600 boot" and TV display a Black Screen!!!

INCREDIBLE!!!!

From 2 day ago this is the only function of my DM 5620.
I Understand wath appened??!??!?!? BOOOO.

[maxpreviti]

Tanks at all!!

[Astra_Boy]

000 Enabled System Memory [RAM] (originally "Disabled" but enabled by myself)

* This should be disabled
With serial cable load erase image,then flash with old original factory image and see if it works
Then reply here with your results

[maxpreviti]

I have upload the erase.img on my dreambox ....-> SUCCESS
I have upload the rel103.img on my dreambox ....-> SUCCESS

My dreambox don't boot .... it have always the same problem!

It's only work the boot loader via telnet!!!

Tanks at all.

I be wait for yours instruction ...

tanks so much