SF image 20.8 where can I find it? Link?

[chaoscreator]

Trying to find SF image dated 20.8 - haven´t found it. Have anybody a link where I would find it?
Tried the 9.9 dated SF image. The rotor setup won´t work as it should, the image looses saved satellite positions (tries to drive to them but won´t find them) and the signal strengt meter shows mostly zero when you trying to setup the rotor (has to go to menu for search of channels to see the actual strengt of singal - and then back to rotor installation and drive the dish the way necessary). Have to try the 20.8 version it may be a better version for rotor.

Have you any other good image sugestions for dm 5620s + superjack rotor. Have tried Hydra Olympia (ok but unstable whit scam) but would like to try some other one. Important that the image should be stable (as stable as possible) emus + that normal extra of course incl.

[Ravenquest]

One trick I have used with images when I neevr got signal strength when setting it up as motor, I merely had the dish prepositioned on say hotbird. I then at satellite config menu choose simple setup and tell ti to look at hotbird and get it to scan this first.

When hotbird is scanned I go back to the config menu and tell it to use diseqc motor and all is ok. Just align up the other sats and store.

[chaoscreator]

thats right i figured ti with the sf after a while. Though the version i used was no good fot a motor setup.
Haven´t still found the 20.8 version so i put the tiger 5.5 fixed in the box and now started to look if it is worth using.
So if you know whre to get the sf 20.8 version please let me know.

[Raggety]

There's a lot of 56xx images here, including the one you want - you'll have to register to get to them.

http://www.i-have-a-dreambox.com/wbb2/database.php

[chaoscreator]

Thanks Raggety!
I´d just found that site as well and I took and tried the Terminator v9 and i very pleased with it! It´s really worth a try. There was no problem with the motor setup, the softcams works fine even Free X and XDream works.
Picture quality was first quit bad but figured it out that was couse of the a/v settings where the colors where set to be RTG by changing that the picture qualite is good.
The link you did give is really good, as a mater of facts.