Searching for Loader 5600

[larson44_33]

Hi,

I'm looking original loader for my crashed db 5600, i'm using ucas to correct it.

Thanks for your help.

Cheers


--------------------------------------------------------------------

this log with a 5620 loader but doesn't work with communication of null modem cable .


[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
Dreambox DM5620
loaded at: 00500000 005F71F8
relocated to: 00400000 004F71F8
board data at: 004F4128 004F4168
relocated to: 00405564 004055A4
zimage at: 00405AD0 004F3
avail ram: 004F8000 02000000
Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock/0
Dreambox DM5620
Dreambox DM5620 - Bootloader V.1.01 - 25.04.2004
------- System Info --------
Processor speed = 252 MHz
EBIU speed = 63 MHz
Amount of RAM = 48 MBytes
--- Device Configuration ---
Power-On Test Devices:
000 Disabled System Memory [RAM]
002 Enabled Ethernet [ENET]
----------------------------
Boot Sources:
001 Enabled Application in Flash [FLASH]
002 Enabled Ethernet [E
local=0.0.0.0 remote=255.255.255.255 hwaddr=000934badadd
003 Disabled Serial Port 1 [S1]
Baud = 9600
----------------------------
Automatic Boot: Enabled
----------------------------
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
->
Dreambox DM5620
Dreambox DM5620 - Bootloader V.1.01 - 25.04.2004
------- System Info -----
Processor speed = 252 MHz
EBIU speed = 63 MHz
Amount of RAM = 48 MBytes
--- Device Configuration ---
Power-On Test Devices:
000 Disabled System Memory [RAM]
002 Enabled Ethernet [ENET]
----------------------------
Boot Sources:
001 Enabled Application in Flash [FLASH]
002 Enabled Ethernet [ENET]
local=0.0.0.0 remote=255.255.255.255 hwaddr=000934badadd
003 Disabled Serial Port 1 [S1]
Baud = 9600
----------------------------
Automatic Boot: Enabled
----------------------------
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
->
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
->
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
->
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
->
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
->
Dreambox DM5620
Dreambox DM5620 - Bootloader V.1.01 - 25.04.2004
------- System Info --------
Processor speed = 252 MHz
EBIU speed = 63 MHz
Amount of RAM = 48 MBytes
--- Device Configuration ---
Power-On Test Devices:
000 Disabled System Memory [RAM]
002 Enabled Ethernet [ENET]
----------------------------
Boot Sources:
001 Enabled Application in Flash [FLASH]
002 Enabled Ethernet [ENET]
local=0.0.0.0 remote=255.255.255.255 hwaddr=000934badadd
003 Disabled Serial Port 1 [S1]
Baud = 9600
----------------------------
Automatic Boot: Enabled
----------------------------
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application


Tested with 5620 loader cause on my 5600 motherboard, i 've got lan (beta version of 5600?) but doesn't work, so i'm looking for the 5600 's loader

Cheers

[Raph4el]

------- System Info --------
Processor speed = 252 MHz
EBIU speed = 63 MHz
Amount of RAM = 48 MBytes
--- Device Configuration ---
Power-On Test Devices:
000 Disabled System Memory [RAM]
002 Enabled Ethernet [ENET]
----------------------------
Boot Sources:
001 Enabled Application in Flash [FLASH]
002 Enabled Ethernet [ENET]local=0.0.0.0 remote=255.255.255.255 hwaddr=000934badadd
003 Disabled Serial Port 1 [S1]
Baud = 9600
----------------------------
Automatic Boot: Enabled
----------------------------
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application


You need to disable the Ethernet Boot option!
Your system is confused and does not know where to boot from!
You need to boot from Flash and not from network!!!

[larson44_33]

==== ENABLE A BOOT DEVICE ====
Boot Sources:
001 Enabled Application in Flash [FLASH]
002 Enabled Ethernet [ENET]
local=192.168.0.24 remote=255.255.255.0 hwaddr=000934badadd
003 Disabled Serial Port 1 [S1]
Baud = 9600

----------------------------------

i test to modify the values by my own ip , and to enable the serial port, but as soon i switch off the dream, i lost the new enter values.

The problem i think, is I put a 5620 loader, and my dreambox is a 5600 model so needed a loader for 5600. Even my 5600 's got a lan connection but is not a 5620, is a 5600 rev xB

Thanks for help

Cheers

[larson44_33]

I test with your loader bootloader56xx but seems to be fot 5620 and not for 5600
http://sat-industry.net/forums/showthread.php?t=3781

[Raph4el]

You don't seem to understand! You can only have one of the three enabled! And that is the booting from Flash!
Do not set any IP this got nothing to do with the Dreambox network IP for communication.
Set it to Flash and that's it!

[larson44_33]

ok thanks i'll try again