Upload image via LAN on DB 500S

[Frame]

Hi,
someone can tell me if there is a utility that can upload Image for DB 500s via LAN?
I've try flashwizard but the problem is: 500S want the flash erase before charge up image!..so if you try to update without erasing the 500s after restar don't work!!
Now the only way that I Know is to use dreamup utility (for 500s only) and charge the Image with (the SLOW!!) Serial cable!!

One question more: what is the "reset" sequence (like the 3 botton pushed tor 3 second in front of DM 5620 for ex.) for db 500s..it have only the standby/ON botton (only one botton and no more!)?

Thanks

[Goran65]

I have used FlashWizard 4.5 on the 500S no problems.

RESET = 3 sec on the POWER Toggle button (Stand by) on the remot. Then choose REBOOT NOW

Goran

[Frame]

Thanks a lot Goran!!

Can you explain how have you used flashwizard on DB500s?.. Have you erase flash memory after upload a new IMG?

..the problem on DB500 is that have not a diplay (like 5620 that show you " ----" when charge the new IMG...DB500 stay in "black screen mode" and after more seconds (I think 30/40 seconds) if it's all okey show menu OSD.. (the 5620 also have a screen befor star ..like the cristal balls on GEMINI IMG for ex..)

[Goran65]

@Frame

Just upload the image with Flashwizard. No I have not flash erased after. It works great. BUT you must reboot the 500 manualy efter flash. (Remove the power supply). If you have the power ON the screen shows something like "FLASHWIZARD UPLOADING IMAGE" I don't remember....

Just reboot the 500 when Flashwizard says ALL DONE... It takes about 3 minutes.