tuxtxt problems

[Read Noise]

I have some problems with tuxtxt on the Gemini 1.01 image:
the major problem is that if I exit the videotxt with the "exit" button all the DM500 functions via remote are blocked, only a reboot is possible.
The second problem is that I can't scroll all the tuxtxt config menù: e.g. I can't reach the option to change the language...

How I can resolve these problems?

Thanks!

[alfarobl]

I don't have problems using tuxtxt with Gemini 1.01... I do exit and it works fine. Do you have any other plugin that might be in conflict? Did you try a different emu?
How do you enter the menu so I can check your second problem? I think you can edit /var/tuxbox/tuxtxt and there should be a .conf file. Maybe that will help...

Originally Posted by Read Noise

I have some problems with tuxtxt on the Gemini 1.01 image:
the major problem is that if I exit the videotxt with the "exit" button all the DM500 functions via remote are blocked, only a reboot is possible.
The second problem is that I can't scroll all the tuxtxt config menù: e.g. I can't reach the option to change the language...

How I can resolve these problems?

Thanks!

[Read Noise]

Originally Posted by alfarobl

I don't have problems using tuxtxt with Gemini 1.01... I do exit and it works fine. Do you have any other plugin that might be in conflict? Did you try a different emu?
How do you enter the menu so I can check your second problem? I think you can edit /var/tuxbox/tuxtxt and there should be a .conf file. Maybe that will help...

To enter the config menu simply press "menu" button when teletext is on...

I don't use any plugin other than the newcamd 5.25: what emu do you use?

In the /var/tuxbox/config/tuxtxt/ there is the tuxtxt.conf file (size:20byte) but is in binary format: how I can edit it?

Thanks!

[Read Noise]

I have made some tests with an oscilloscope on the scart output (see the RGB problem post also)

About my primary problem with teletext, I have found that when I exit from the teletext the scart pin 8 (which when is hi indicate to the TV that the DM500 is on) switch from hi to low state.

Probably you don't see any effect because the scart cable which you use don't have the pin 8 connected...

Let me know If you find a solution for the tuxtxt config problem...

Thanks!