Irdeto2 card problem !!!

[candel2004]

hi
I don't know why Irdeto2 card can't work under Newcamd (all versions )for more than 2 days , then it dies
so I've to use external Irdeto2 cam -put the card inside- to send the card back to live , so it can work under Newcamd but not more than 2 days then .......

any idea
thanx

[nicosia]

Originally Posted by candel2004

hi
I don't know why Irdeto2 card can't work under Newcamd (all versions )for more than 2 days , then it dies
so I've to use external Irdeto2 cam -put the card inside- to send the card back to live , so it can work under Newcamd but not more than 2 days then .......

any idea
thanx

----------
The physical emu for Irdeto2 is " radecast " for all images. You have then to activate this emu by pressing OK on it and set the correct parameters for the upper or lower card readers.(on the first line "second" should be first. Leave phoenix to "disable")
The same action is needed for Newcamd. By pressing OK on it you will have a list wich corresponds to the upper or lower card readers. Activate by turning "no" to "yes" for the first two lines..Press aply and all will be ok...
-------
Nicosia

[Kojo]

in newcamd 'cardserv.cfg' card reader(s) should be set like this:

#
# upper card slot
#
SERIAL_PORT = 0
TCP_PORT = 10000
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = no
#
# lower card slot
#
SERIAL_PORT = 1
TCP_PORT = 10001
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = no

[PAO1908]

Hi.

Tried to do it with a linux server with a nova card, but the problem is: The card doesnt get the updates. After some hours, the card has to be activated in a module. Anyone experience in autoupdating the card in the phoenix reader and server ? I have one user in the list that should make the update, but it doesnt work for me...

cu and thanks

[CruC]

Yes , I guess I have the same problem.. I have orj Ultrablue via2 .. card couldn' update by module and regarest too.. I don't know why? Any idea?

[jpm]

oh... is there a new emu out; regarest? where can I download

[PAO1908]

Your card has been damaged m8, I killed 4 cards all via2, with newcamd and radegast

[Kojo]

What's up with you guys?

Do as I said above and I2 cards must update!!

[hazem]

@ kojo
you are absolutely right
I 've no problem in my Irdeto2 card working under Newcamd , after I made the settings you mentioned - I think you said it before and I did it after your advice
thanx

[CruC]

How can I update my card?