problemS with my DB.

[slack]

hello every body.

i hope you can help me with my problems.,.. and many thanx for all..

1- i`ve blueice. its still freezes with vi. channels.!!
2- just installed rudream 1.08.2 beta. 9/9 in flash, and 1.08.2 beta in USB,
i used flash wizard, to boot. when i chose to boot from USB its hang-up
3-i got 2 irdeto cards. and its now working with newcamd 5.25 ,5.26
in 5.26 its says "no advanced setup" for the emu cfg.
also if its works. its will work only for lower slot, how can i do this with upper slot.!??! both with same time..

Thank you all

[cwispy]

Originally Posted by slack

hello every body.

i hope you can help me with my problems.,.. and many thanx for all..

1- i`ve blueice. its still freezes with vi. channels.!!
2- just installed rudream 1.08.2 beta. 9/9 in flash, and 1.08.2 beta in USB,
i used flash wizard, to boot. when i chose to boot from USB its hang-up
3-i got 2 irdeto cards. and its now working with newcamd 5.25 ,5.26
in 5.26 its says "no advanced setup" for the emu cfg.
also if its works. its will work only for lower slot, how can i do this with upper slot.!??! both with same time..

Thank you all

Im not quite sure that i understand exactly what you have running, but here is something you may want to try.

Install rel 108.1 in flash and then try running your other images off the usb. You might even want to run the erase.img over the db first to ensure the flash is completely clean before installing the rel 108.1. Good luck.

cwispy

[goerz]

Originally Posted by slack

hello every body.

2- just installed rudream 1.08.2 beta. 9/9 in flash, and 1.08.2 beta in USB,
i used flash wizard, to boot. when i chose to boot from USB its hang-up

Thank you all

I had a lot of problems with 1.08.2 (rudream and official beta) in flash and my USB memory stick. In short, my dreambox wouldn't boot when the USB stick was inserted, I had to go back to 1.08.1 in flash. Now everything works fine and I can run rudream 27-11 on USB.
Regards,
Goerz

[MrBandwidth]

That's why a beta release is actually called a "beta" even if it's "official".
Beta software is for testing purposes only and can (most probably does) have bugs!