Flaswizard killed my dreambox 7000s

deepdark · #1 (**permalink**) 03-02-2005

i Flashed my dreambox 700s from Latest hydra to gemini and the flashwizard stoped at 94% and started to counting something until 1000 and i stoped the procces becouse i waited a 1 hour and now my dreambox wont boot even with dreamup with serial cable any help?

romek666 · #2 (**permalink**) 03-02-2005

try again it should work with serial ...

check com ports on your pc

//r

**Astra_Boy** · #3 (**permalink**) 03-02-2005

First off ,no one but you killed it .........
Second ,what does it say on the LCD ?

DJBlu · #4 (**permalink**) 03-02-2005

Remember to erase the image b4 uploading with the serial cable. I had this problem then fixed it when I erased the image first.

**Astra_Boy** · #5 (**permalink**) 03-02-2005

Hows he going to erase it when the box wont boot ?

deepdark · #6 (**permalink**) 03-02-2005

Dreammultimedia stays at LCD and is not booting strange and i checked the com ports no way?

deepdark · #7 (**permalink**) 03-02-2005

i cant connect m8 if i can connect i will erase..

Quote:

Originally Posted by DJBlu

Remember to erase the image b4 uploading with the serial cable. I had this problem then fixed it when I erased the image first.

**Astra_Boy** · #8 (**permalink**) 03-02-2005

The box isnt dead ,remove it from power for 10 mins and try dreamup again

deepdark · #9 (**permalink**) 03-02-2005

ohhhhhh thx for your help but no way dear my friend

Quote:

Originally Posted by Astra_Boy

The box isnt dead ,remove it from power for 10 mins and try dreamup again

**Izlan** · #10 (**permalink**) 03-02-2005

use dreamup and uncheck the box "use network", click connect and then plug your dreambox and wait as long as possible. when it's connected, click on erase. when erase finished, load the original DMM image on your box.
Flashwizard is the best utility for dreambox, maybe you've tried to flash with a corrupted file!