The Smargo SmartReader +

[tintinet2002]

@hemertje

sorry for my bad english, but i want to know if there are "compile drivers" for the DB 7000/7020 enigma1 or only for 7025?

D...uw

[hemertje]

the source is in the package..

[Salem]

Originally Posted by slayer7

ok that has been fixed using the below commands

modprobe usbserial

modprobe ftdi_sio

Ln -s /dev/usb/ttyUSB0/dev/ttyUSB0


And when i type dmesg it recognises smargo +

ftdi usb serial device converter now attached to ttsUSB0

so no prob there

i have flashed using srp using the bootloader and enable normal functions using n

but there is another option there saying press a to enable kernel 2.6.12-xx mode <i take this is not needed?


the prob is now when i start cccam there is no sign of the card in cccam

in the cfg i have entered /dev/ttsUSB0 and tried various combinations with no luck still

@slayer7

i am at the same step as you where.
The reader is seen (checked with dmesg)
But CCcam is not seeing the card.
I added these lines as test, but no go :-(
SERIAL READER : /dev/usb/tts/0 smartreader+
SERIAL READER : /dev/usb/tts/1 smartreader+
SERIAL READER : /dev/usb/tts/2 smartreader+
SERIAL READER : /dev/usb/tts/3 smartreader+
SERIAL READER : /dev/usb/tts/4 smartreader+
SERIAL READER : /dev/usb/tts/5 smartreader+
SERIAL READER : /dev/usb/tts/6 smartreader+
SERIAL READER : /dev/usb/tts/7 smartreader+
SERIAL READER : /dev/usb/tts/8 smartreader+
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SERIAL READER : /dev/ttyUSB3 smartreader+
SERIAL READER : /dev/ttyUSB4 smartreader+
SERIAL READER : /dev/ttyUSB5 smartreader+
SERIAL READER : /dev/ttyUSB6 smartreader+
SERIAL READER : /dev/ttyUSB7 smartreader+
SERIAL READER : /dev/ttyUSB8 smartreader+

Any tips are welcome.
I am running Linux ubuntu.

cheers

[Salem]

Or does anyone know how to send those cmd's to switch the reader to cmd mode ?

[Awgtuyo]

Trying to use the Smargo on windows XP pro with Nagraedit 4.1. I get a good ATR but than get ifs error. Is there any other setting that needs to be changed?

[ubbe]

No
Dont buy this reader. There is no support or applications to use for this reader.
I have asked the creator but nothing usefully from that side.
IMHO
Ubbe

[radxnl]

hmm.. very strange..

after i asked for the auto switching mode it was released one week later...

sure you are talking to the right people?

[ubbe]

Originally Posted by radxnl

hmm.. very strange..

after i asked for the auto switching mode it was released one week later...

sure you are talking to the right people?

Contact using mail to Hans at productsupport@argolis.com
I suppose that is the right people as they develoop the reader..
Best Regards
Ubbe

[fener]

Hi guys,
can some1 help me with this reader? He can't read irdetocard version zetacard. viaccess and seca no problem also dreamcryptcard no problem but with irdeto no luck!!!
Also i tried: SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000

He will not work

Any one?

Ciao to all

[master-magic]

i have the same problem here,
is there a solution???????
ps: i speak also dutch.

Originally Posted by Salem

@slayer7

i am at the same step as you where.
The reader is seen (checked with dmesg)
But CCcam is not seeing the card.
I added these lines as test, but no go :-(
SERIAL READER : /dev/usb/tts/0 smartreader+
SERIAL READER : /dev/usb/tts/1 smartreader+
SERIAL READER : /dev/usb/tts/2 smartreader+
SERIAL READER : /dev/usb/tts/3 smartreader+
SERIAL READER : /dev/usb/tts/4 smartreader+
SERIAL READER : /dev/usb/tts/5 smartreader+
SERIAL READER : /dev/usb/tts/6 smartreader+
SERIAL READER : /dev/usb/tts/7 smartreader+
SERIAL READER : /dev/usb/tts/8 smartreader+
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SERIAL READER : /dev/ttyUSB3 smartreader+
SERIAL READER : /dev/ttyUSB4 smartreader+
SERIAL READER : /dev/ttyUSB5 smartreader+
SERIAL READER : /dev/ttyUSB6 smartreader+
SERIAL READER : /dev/ttyUSB7 smartreader+
SERIAL READER : /dev/ttyUSB8 smartreader+

Any tips are welcome.
I am running Linux ubuntu.

cheers