[cani]

Originally Posted by userclampit

1 select a new clean image like Zeus from the net.

2 connect a nullmodem ( Dtype RS232 ) cable to the dream box and connect the other to your computer, "com1"

3 Run Dreamup

Set Comport to 1 or 2 depending on one selected by you on computer.

4 Click "Connect" and then turn on the Dreambox.

5 A blue bar should go up in the dreamup software on your computer.

6 If not try another comport.

7 Once connected click "ERASE" and once done, Click "flash" and select your image, and then sit back and wait.

If you fail to connect to the Dreambox with the above method, it is likely that their is a fault with the computer you are using, or the nullmodem cable.
If you do manage to reflash the Dreambox, remember to remove the cable and end the software running on your computer, as this if left connected will stop the new image from booting.
Hope this helps you get giong.

Thanks, it works now!