|
If you have Dream Multimedia on the LCD display then your bootloader is ok. You'll need a null-modem (cross wired) serial cable with the DreamUp program.
Connect the serial cable to PC and Dreambox.
Disconnect the box from the mains.
Start DreamUp and ensure you have the correct serial port selected.
Connect the Dreambox to the mains - DreamUp should say it's found the box.
Select Erase. Wait for DreamUp to complete the task.
Use DreamUp to load a valid image then reboot the Dreambox - You may need to use Flash-erase (restart with UP button pressed).
|