[herba71]

Becouse i block bootloader from my DB lot of times i want to give in this forum some advices for all new & old members that my official agency give to me for solve most of DB problems.

1.You must put again the power cable into DB,if you unplug it after 30 seconds,becouse after this time the condensers inside remove the static electricity.(For fixing this problem,close your DB for 24hours,and then repeat installing the image that you like)

2.Plug first the dish(antenna)cable,scart,and then open the DB.

3.If you propose to upgrade your DB via null modem cable,one of the two machines(PC&DB)must be unplugged from electic power,and then put null modem cable into DB.

4.Don't remove the front cover,if you propose to install hard disk inside the DB.Unscrewing the sides,and pull up the metalic cover.

5.Don't press the remote control buttons too quick,two of them in the same time becouse the DB freezing.


Maybe someone put other advices that i forget in this time.Do it for the members that have no experience.


Thanks
herba71