[Geremia]

what i logged is what i can reproduce with winexplorer, so baud are correct, commands are correct.
This card have different atr from standard irdeto.
I've protocol T=0, TA1=11, so according to iso7816-3 max 5mhz clock, ant TC1=60 (byte delay), so:

For external clock cards:

initial etu = 372/fi s work etu = (1/D)*(F/fs) s

in my case (1/1)*(372/3579000) = 0.0001039396 duration in second of a bit

1second/0.0001039396 = 9620 bits per second

i've measured the clockrate of my dvb-t box and it's 3,376MHz,
so work etu (1/1)*(372/3376000) = 0.0001101895 seconds
1/0.0001101895 = 9075 bits per second

don't really know how loggin software consider their baudrate settings, maybe there is a 9th bit (initial bit?!?!!?, don't know), but 9075/9*8=8866
I logged with unilogger at 8860 8E2 direct, and what i logged i can reproduce with winexlorer at 9600 8E2 direct with 11220 microseconds of byte delay:


Trying to reset card...
Reset Successful

RX ATR : 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 30
TX Data : D2 04 03 00 01 3D
RX Data : 3D 60 90 19
TX Data : D2 FE 03 00 19
RX Data : FE 01 02 00 00 02 03 00 10 06 05 12 06 19 06 20
06 21 06 22 00 00 49 54 41 5A 90 00
TX Data : D2 00 03 00 01 3F
RX Data : 3F 60 90 1D
TX Data : D2 FE 03 00 1D
RX Data : FE 01 02 00 00 00 03 00 14 34 30 30 37 33 31 37
31 37 30 xx xx xx xx xx xx xx 00 00 00 0C 90 00
TX Data : D2 02 03 00 01 3E
RX Data : 3E 60 90 19
TX Data : D2 FE 03 00 19
RX Data : FE 01 02 00 00 01 03 00 10 FF FF FF 00 00 00 00
00 00 00 04 07 xx xx xx xx xx 90 00